Jump to content

Shallow reef tank


Recommended Posts

This is not a common design, neither on the net nor in the factories...

went to many for quote, only CR rather adventurous took up the offer on the warranty..

ME (after tank is build) : "So what do u think of my tank? nth like the usual boring sort...."

CR Boss : "I think its cute..."

ME : "Traumatised,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,," :o

Below is the tank on 18 May.....

post-2836-0-40439900-1337612261_thumb.jp

Link to comment
Share on other sites

tank is a 12mm normal glass, dimension : 14" X 16" X 3.5' the sump is together as an overflow sump. I did not do the sump below the tank, dislike all the extra pipings...

I must say bro Mc Queen crystal glass makes my tank looks dark, but when i gone home, i realise the black silicon and foam base, and reflective thick glass makes the tank internal looks darker than normal, if compare to a white silicon thinner glass and white styrofoam base..

Link to comment
Share on other sites

  • SRC Member

Nice white color cabinet tank!

CR = CoralReef Aquarium (Tank Maker)

I think his sump is inside the display tank itself at the end;

Just to let water flow thru media and maybe a skimmer then pump out the water;

like a nano sumpless tank.

Cheers!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Nice white color cabinet tank!

CR = CoralReef Aquarium (Tank Maker)

I think his sump is inside the display tank itself at the end;

Just to let water flow thru media and maybe a skimmer then pump out the water;

like a nano sumpless tank.

Cheers!

It looks sth like tht...

post-2836-0-77491300-1337748501_thumb.jp

Link to comment
Share on other sites

tank viewable are : W360 X H410 X L1080mm,

Sump : W360 X H410 X L300mm

Dont do the same as me, alot of calculations is required with regards to the sump area ability to store water and the evaporation rate at (i last check was 1.14litre/day) due to the long rectangle large surface area, my previous 2 feet cube was only around 800ml/day.

You guys may want to use white silicon to reduce on the general effect. I dont think will change for another 5years since the warrnaty is 10yrs, i was afraid of the algae marks so i use black silicon.

most importantly wife says :"NO WIRING ALLOW ON CEILING!!!"

RBTA : No it is not from iwarna

post-2836-0-81597500-1337748718_thumb.jp

Link to comment
Share on other sites

  • SRC Member

Nice design; I am thinking about the same design for my nano tank. Visiting CR soon!

I always have the feeling that black silicon is stronger than white (is all in my head); not sure true or not.

Anyway, will your chiller having heat problem in the cabinet?

Chiller needs to draw in air and expel hot air, yes?

Yeah, you may need to have auto top-up for peace of mind.

Cheers!

  • Like 1

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Nice design; I am thinking about the same design for my nano tank. Visiting CR soon!

I always have the feeling that black silicon is stronger than white (is all in my head); not sure true or not.

Anyway, will your chiller having heat problem in the cabinet?

Chiller needs to draw in air and expel hot air, yes?

Yeah, you may need to have auto top-up for peace of mind.

Cheers!

Anyway here the answer to your qns, door norm left open unless got visitors...

post-2836-0-51176500-1337871978_thumb.jp

Link to comment
Share on other sites

Can you guys share what you use to clean your tank glass with?

Barely a week, small diatoms patch appearing..

For me, I juz cut a small piece of filter wool to wipe the glass surface. Other than that magnet glass cleaner.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Supporter

Try using a ezlink card or something similar, can be easily removed with that. Maybe just do it when u perform your water change.

My little ocean
Mix Reef-Main tank 30 inches Length x 32 inches Width x 18 inches Height
2 X Skim DC return pump
Aquabee 2000 chiller feeder

Hailea 1/2 Chiller
1 X Tunze nano wavebox

2 X EcoTech Marine Vortech MP10W
Deltec skimmer - Internal
Lumenarc 400watt 12K Reeflux

8 X T5 ATI Powermodule
Prolifux control with external touchscreen display
Refugium keeping chaeto

Link to comment
Share on other sites

Try using a ezlink card or something similar, can be easily removed with that. Maybe just do it when u perform your water change.

If u have any old atm, credit card or any acrylic made card also can.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

no to scare u all, but the 1st day after setting up, i was greeted by this fella...

its nth i ever seem before anywhere else...

This is commonly found on a sandy area....

Widely appear in Malaysia.....

Not dangerous...

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 1

      DECOM SALE ( FREE TANK SET )

    2. 0

      SECURING YOUR CRYPTO ASSETS WITH MUYERN TRUST HACKER

    3. 0

      WTS AI Prime with Gooseneck

    4. 8

      Decom sales

    5. 0

      How do I recover a scammed investment?  Contact Captain WebGenesis.

×
×
  • Create New...