Jump to content

Reef keeping good practices list (all welcome to add)


asg
 Share

Recommended Posts

  • SRC Member

Hi all, creating a post for all to share what one practices at home for good reefing. Newbie old bird all are welcome to add.

Let me keep the fish rolling

1) keep a calender and write down every key thing that requires attention and replacement eg added 100g of AC on 13/08/14, wash wave maker on ddmmyy, etc.

2) keep all the manual of the equipment and re read them from time to time

3) buy a small digital scale to measure AC, Bio-sphere, etc

4) buy stock when your existing bottle is half left

5) always have a pail of aged replacement sea water ready

6) test your water at least once a week even if everything appears fine

7) know which LFS can be trusted and which is snake oil seller

8) label all your electrical plugs

9) next person please add...

子非鱼,焉知鱼之乐... (you are not the fish so you...)

Then: my 4FT low tech selling off tank... (2006)

Now: (2014)

@Sept 2014

Link to comment
Share on other sites

  • SRC Member

10) Do not pour lfs water into your reef tank cos it might contain copper for fish treatment or salinity might be very low.

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

I don't know if this is a good reefing practice or just a safety note but do set drip loops for all your electrical devices for your aquarium. Especially after some maintenance, there's a chance to forget to put the wires back in place for a drip loop.

Link to comment
Share on other sites

  • SRC Member

1) keep a calender and write down every key thing that requires attention and replacement eg added 100g of AC on 13/08/14, wash wave maker on ddmmyy, etc.

2) keep all the manual of the equipment and re read them from time to time

3) buy a small digital scale to measure AC, Bio-sphere, etc

4) buy stock when your existing bottle is half left

5) always have a pail of aged replacement sea water ready

6) test your water at least once a week even if everything appears fine

7) know which LFS can be trusted and which is snake oil seller

8) label all your electrical plugs

9) next person please add... emoji89.png

10) Do not pour lfs water into your reef tank cos it might contain copper for fish treatment or salinity might be very low.

11) wash your hand and arm before you put them into your fish tank (even for one second).

12) Always check and empty your skimmer cup to prevent overflowing.

2x2x1.5

======

Maxspect Gyre

Maxspect Razer 120w 16k

H2O FR with Rowa

Eheim Universal 2400

BM Nac 5.5

JBJ Arctica 1/10Hp

Link to comment
Share on other sites

  • SRC Member

Just wondering, do you use any hand soap to wash hands or just water? I am paranoid about soap.

I use soap... and follow the SARS eight steps washing protocol cos i believe soap is cheaper than fish in the long run

子非鱼,焉知鱼之乐... (you are not the fish so you...)

Then: my 4FT low tech selling off tank... (2006)

Now: (2014)

@Sept 2014

Link to comment
Share on other sites

  • SRC Member

1) keep a calender and write down thing that requires attention and replacement eg added 100g of AC on 13/08/14, wash wave maker on ddmmyy, etc.

2) keep all the manual of the equipment and re read them from time to time

3) buy a small digital scale to measure AC, Bio-sphere, etc

4) buy stock when your existing bottle is half left

5) always have a pail of aged replacement sea water ready

6) test your water at least once a week even if everything appears fine

7) know which LFS can be trusted and which is snake oil seller

8) label all your electrical plugs

9) next person please add...

10) Do not pour lfs water into your reef tank cos it might contain copper for fish treatment or salinity might be very low.

11) wash your hand and arm before you put them into your fish tank (even for one second).

12) Always check and empty your skimmer cup to prevent overflowing.

13) keep record of fishes u buy..do not add too many too fast..

@ 291213

Updated video: Kenyee FOWLR

http://m.youtube.com/my_videos

Link to comment
Share on other sites

  • SRC Member

Regarding point 13, is there a guide as to how many fishes are recommended for a specific size of tank? Say, my tank is 4x1.5x2.5, what is the recommended max number of fishes I should have without risking overloading?

I read somewhere, the very very general guideline is roughly one cm of fish for each gallon of water. Of cos the bio load for a five cm triggerfish is way higher than a five cm goby...

子非鱼,焉知鱼之乐... (you are not the fish so you...)

Then: my 4FT low tech selling off tank... (2006)

Now: (2014)

@Sept 2014

Link to comment
Share on other sites

1) keep a calender and write down thing that requires attention and replacement eg added 100g of AC on 13/08/14, wash wave maker on ddmmyy, etc.

2) keep all the manual of the equipment and re read them from time to time

3) buy a small digital scale to measure AC, Bio-sphere, etc

4) buy stock when your existing bottle is half left

5) always have a pail of aged replacement sea water ready

6) test your water at least once a week even if everything appears fine

7) know which LFS can be trusted and which is snake oil seller

8) label all your electrical plugs

9) next person please add...

10) Do not pour lfs water into your reef tank cos it might contain copper for fish treatment or salinity might be very low.

11) wash your hand and arm before you put them into your fish tank (even for one second).

12) Always check and empty your skimmer cup to prevent overflowing.

13) keep record of fishes u buy..do not add too many too fast..

14)Wash or svc chiller filters more often than not chillers are always neglected.

Link to comment
Share on other sites

  • SRC Member

1) keep a calender and write down thing that requires attention and replacement eg added 100g of AC on 13/08/14, wash wave maker on ddmmyy, etc.

2) keep all the manual of the equipment and re read them from time to time

3) buy a small digital scale to measure AC, Bio-sphere, etc

4) buy stock when your existing bottle is half left

5) always have a pail of aged replacement sea water ready

6) test your water at least once a week even if everything appears fine

7) know which LFS can be trusted and which is snake oil seller

8) label all your electrical plugs

9) next person please add...

10) Do not pour lfs water into your reef tank cos it might contain copper for fish treatment or salinity might be very low.

11) wash your hand and arm before you put them into your fish tank (even for one second).

12) Always check and empty your skimmer cup to prevent overflowing.

13) keep record of fishes u buy..do not add too many too fast..

14)Wash or svc chiller filters more often than not chillers are always neglected.

15)weekly water change (that prove to be very important for me)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...