Jump to content

Jebao DC 12000 rust issue


khementi
 Share

Recommended Posts

Hi all,

Just want to share my experience with other reefers out there.

Got a Jebao DC 12000 controllable pump as my main return pump in April this year, started using it in late July/early August. As you can see from the picture, rust is forming on thr casing that covers the impeller, likely from the nuts. The screws holding them in place are titanium, but apparently the nuts are not.

As the pump is out of warranty (six months) and spare parts aren't sold here, far as I know, it's a pity because the DC 12000 was a great pump - quiet, powerful and controllable - but rusting after a few weeks is quite a big disappointment. Reefers overseas have had similar issues too, if you do a search.

So if anyone else out there is using the pump, look out for brown stains where the impeller cover connects to the main body of the pump (where the black and blue bits join), take a moment to check the inside for rust.

post-21781-0-45589200-1417525134_thumb.j

Link to comment
Share on other sites

  • SRC Member

Is it due to rowaphos ?

Do u use rowaphos ?

That part all plastic wor

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Look like phos

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Hi guys. No, I was using fauna marin ultra phos which is aluminum based, and that reactor has been unplugged for about three weeks before this. If you do a Google search, some guys on reef central had the same problem, part was replaced by the dealers. As far I can tell, the screws are titanium but the nuts are not. Apparently they had issues with low grade stainless steel. It's not loose precipitate either, this brown stain can't be scrubbed out.

One example here. For this recipe don't know,waveline and jebao are from the same oem. http://www.ultimatereef.net/forums/showthread.php?t=683343

And here :http://www.reefcentral.com/forums/showthread.php?t=2356006

Link to comment
Share on other sites

  • SRC Member

After reading this thread, I also took out my waveline DC6000 to check. Indeed its rusting, the rust smell is very strong. Open the casing, both side of the housing has rust stain. But I can't locate where the rust coming from. The screw and the nut is not rusting, where else got metal parts on the pump?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...