Jump to content

My journey in custom made 2ft cube with sump


vincentwangz
 Share

Recommended Posts

  • SRC Member

Hi guys, my previous tank was the IM Nuvo Fusion Mini 40 gallons, and had quite a good time reefing with that tank. The only challenge I did not manage to overcome was the nutrient export that was hard to do with an IOS, given the limited space that it has for good skimming and filter media. That was why I went for the big upgrade when Aquarium Artists had their opening special! Sharing here as a testimonial that their tanks are one of the best around! Not to mention prompt and friendly service! Poor Vincent was running a fever, but since he had committed to the date, he honored the agreement and came as agreed on the 28 July.

d072044ab123479d72273889491c17de.jpg

Thanks to them, I was the proud owner of my new tank!

f8c1adf2e11bca3934b45624c846d08a.jpg

I wasted no time in filling it up!

584dab07b2d1801b216abd97326b7727.jpg

Since I had livestock and rocks from my previous tank, I had to quickly port them over as I was housing them in a temporary tank!

b832f3fdebf6093d53d39b3d913b0310.jpg

4b85e9c000dbce657944292256e063d0.jpg

Went to AA to get more rocks for my tank. Rescaped! Bought more fish too. Haha

d34b1507d0b2406075ebbc4f386e5fd0.jpg

Soon ran into diatoms issue, read that you can use yeast to counter it.

b730b6d3e39b94d0a57c83ced8cc3eda.jpg

So I went to buy yeast to try! I'm glad to say that 3 doses over 7 days was all it took and the diatoms were gone!!

df270c77fd96b6f840111dea9bff6ceb.jpg

I did not like the huge rock at the bottom right corner so I swooped it out again.

a8cba71781a7d7a36b8f6b6acf2ecd93.jpg

After more deliberation I decided this was the best layout. Have been sticking with it since!

165a5d690fd34dcd0b368c2955828af5.jpg

5b5a5014f00bed13cbe25d209ef4be9e.jpg

646465637a5e2091e1e9fe3cb0ea817b.jpg

Hope you guys enjoyed the post! Happy reefing! Look me up on my Instagram account for more stuff! @sgreefgeek

Sofishticated Friend

  • Like 1
Link to comment
Share on other sites

Nice setup!

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Thanks@drdavis! My glass thickness is 12mm, crystal glass for front and left panel. Yeast seems to rapidly remove the diatoms that accumulate at the start. I just dose a dash of it every two days for a week. Kinda like how you add salt to soup. Haha. But the correct measurement was first featured on Reef2reef and it was something like 1/4 teaspoon for every 300 gallons of water.


Sofishticated Friend

Link to comment
Share on other sites

  • SRC Member

So I added one more gyre at the corner today, directing half to blow the back part of the tank, and half to blow towards the front. Hoping to create more flow at the bottom part of the tank so that red slime does not accumulate at the sandbed.

624dccc765d21d30617ecbb492cca268.jpg

From the side profile can't be seen.

1dd3c4a87a07636f8fdfaa48fa547bb6.jpg

Some close up shots since I'm using my Nikon already. Haha. Really in love with my fishes. All look so cute!

fc77ea8aabb655f21af3b22549b50f12.jpg
37be08572a0ebb1d5942e92e7cea07a6.jpg
c5d6afc2eded2eefc8ad7dc336b4f61c.jpg
a3f69a23c02d8f3b8ecf8c37a5f9a233.jpg
13626f9d47dd4d09ececff7b40f36934.jpg
8f600c112db2b5a1c6d916276c94f328.jpg
5eb9118147e50b3803c5dc8b72380374.jpg
eef65a414f4074526b6d0220120d629a.jpg
f8ad911c6ea7f5afbdf5262888a5da2b.jpg


Sofishticated Friend

Link to comment
Share on other sites

  • SRC Member

Hope you guys are enjoying my posts so far! Am looking to reduce my phosphates, after which I shall move towards adding some SPS corals. So far my nitrates have been between 3-5 ppm and personally I like it at the level. Will use rowaphos to bring down the phosphates soon.

Link to comment
Share on other sites

Nice fishes.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...