DIY MH checklist

[RMX]

can anyone provide the exact parts to diy mh lights? reading thru the forums still confuse me. hoping that all the parts thats need, and the cost/store can be included.

whats the parts needed to hook up a 150w 10k/20k mh? and where to get them?

also, is there a ballast that can be used for maybe rated 400w but can be used for 150 or 250w?

[Joe_P]

can anyone provide the exact parts to diy mh lights? reading thru the forums still confuse me. hoping that all the parts thats need, and the cost/store can be included.

whats the parts needed to hook up a 150w 10k/20k mh? and where to get them?

also, is there a ballast that can be used for maybe rated 400w but can be used for 150 or 250w?

Alright RMX,

Here's the list.........

For Double ended bulbs (150W)

1) Ballast (150 W)

2) Capacitor (20 uf)

3) Ignitor ( check the igniting volatge of the bulb and get one that's sufficient)

4) Rx7 bulb holders

For Single ended bulbs (150W)

all of the above but replace the Rx7 holders with a E27 mogrul base.

and of course reflectors, wires and tempered glass for shielding....

[BarraCudaTM]

wire connectors and single strand wires!