Jump to content

Chris's 3x2x2.5 tank setup


chrislzh
 Share

Recommended Posts

If u r staying ard sengkang, I can pass u mine cos I hvn't been using it since my tank is stable!!! :)

Wah so generous... and so confident ah? :lol: Oh yeah... you do not have an Anemone inside your tank to create havoc :eyebrow:

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

  • SRC Member
i would like to ask, if my ammonia is less than 0.2, is it safe for me to bring in the corals...?

I prefer not to introduce any LS as it shows that your tank is still not capable enough to break down NH4 into NO2!!!

Juz my 2cents!!! ;)

Link to comment
Share on other sites

i would like to ask, if my ammonia is less than 0.2, is it safe for me to bring in the corals...?

It depends whether you wanna take risk or not... if you are to wait for a few days more, the Ammonia will drop to an undetectable level (0.2 is still detectable, and they are highly toxic). Regardless, you still have other parameters to fix... remember... Sg being a very very crucial one. Haha... I'm nagging :lol::lol::lol:

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

  • SRC Member

Wah so generous... and so confident ah? :lol: Oh yeah... you do not have an Anemone inside your tank to create havoc :eyebrow:

After seeing wht happen 2 yr tank, dun dare to try one as I dun hv a powerful skimmer like yours!!! :P

Link to comment
Share on other sites

After seeing wht happen 2 yr tank, dun dare to try one as I dun hv a powerful skimmer like yours!!! :P

Not for long... :eyebrow: And for record purpose... the Turboflotor Percula is NOT a powerful skimmer... most evident when I introduced the baby Deltec... BABY only leh!!! No fight :lol::lol::lol:

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

  • SRC Member

nice rockscape :D

post-34-1155018836.jpg

hmmm some advices from my own experience .... i used to have simliar rockscape as you do .. but as the months go by .. i realise tat those rocks touching the sides of the glass of the tank are abit hard to clean for aglae with the magnetic cleaners .... maybe u would like to shift the rocks ... leaving a bit of allownace for maintainabce :D

hope it helps ..

cheers :D

Link to comment
Share on other sites

sure.. thanks for the advise... anyway, just bought the salifret ammonia test kit... and the test result is milky white so i suppose the ammonia result is <0.25.

<0.25 is still quite high for some LS (especially corals)... maybe wait 3 more days lah... :P

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

  • SRC Member

today took a reading again:

Ph = 8.3

KH = 5dKH (its pretty low.. what should i do)

Mag = 1380

sg = 1.022

Cal = 460mg/l

nitrite = 0.1mg / litres

nitrate = <1mg/litres

Ammonia = <0.25

attached along is the result of my ammonia test using the salifret.... i suppose readin is <0.25, what do u think...

post-34-1155191995.jpg

Link to comment
Share on other sites

today took a reading again:

Ph = 8.3

KH = 5dKH (its pretty low.. what should i do)

Mag = 1380

sg = 1.022

Cal = 460mg/l

nitrite = 0.1mg / litres

nitrate = <1mg/litres

Ammonia = <0.25

attached along is the result of my ammonia test using the salifret.... i suppose readin is <0.25, what do u think...

Well... most parameters are looking good... except KH. Shouldn't be hard to increase, but increase slowly... not exceeding 2dKH per day.

As for the Salifert Ammonia test kit... I can't remember if it is to be read from top or side, is there any indication on the instructions sheet?

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

  • SRC Member
should be side.. cos they indicate to place the colour chart behind.. with these parameters.. do you think i can stock up corals slowly now..?

Bro, u gonna be patient and get the parameter right cos there's a risk of killing yr LS and wasting $ too! ;)

Link to comment
Share on other sites

o... I thought KHis the only parameter i got to take care now.. hehe.. so i should be buying those KH buffer solution to add in then...

You definitely need some form of KH buffer, be it liquid or powder form. The KH will not rise on its own (if I'm not wrong)... it will only continue to drop.

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

Looks good bro... perhaps it is time :)

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

PIX PIX PIX :D

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

jervismun bro, which model of deltec are u using..?

I'm using a MCE600 hang-on type. Amazing little piece of equipment :lol:

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...