Jump to content

Pasar Malam - Home Tanks


clee123
 Share

Recommended Posts

:agreed: !

I have never wanted to turn back to MH and T5 after running LED..:groupwavereversed: !

One thing I notice is China made led tend to be bluish compare to other...dun you?

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • SRC Member

y the led no price one?

Another essential feature I think a new LED system should have is to equipped with necessary waveleghts and specturm of lights needed for a varitey of corals. As light requirements can sometimes vary greatly, even within different coral species but with the same genus. In addition, two species of corals do not grow at the same rate, when under the same photosynthetic wavelength of light. This is because each species requires a specific color wavelength (measured in nanometers) to obtain “optimal” color pigment of the coral’s tissue.

post-16749-0-27987600-1329667236_thumb.j

There are some reefers converted their LED system back to MH or T5 as they find that LED lighting cannot bring out the colour of some of their SPS as compared to when they were using MH/T5. I would like to think that this might due to the fact that old LED covered only certain wavelenghs (White/Blue) required by certain corals but not all. So, a LED system with the auxiliary lights consist of red, green and blue color chips, alternating with purple (voilet) and blue beads can provide the greatest degree of spectrum for the LPS and SPS; With special controller of RGB, dozens of colors can be set and the true color of the fish, coral, and tank can be presented, which in my view, completely change the traditional lighting effect. :superman:

For existing LED users, you might want to consider supplement the auxiliary lights with the followings:

post-16749-0-88697900-1329667371_thumb.j

post-16749-0-29552500-1329667394_thumb.j

Alternatively, for those who are considering converting to LED system, a LED light set with auxiliary lights build in is a preferred option. :idea:

post-16749-0-66748700-1329667800_thumb.g

For additional information on this cheaper LED alternative...you can following this link: :thumbsup:

http://sh-ne.com/eindex.asp

Link to comment
Share on other sites

:agreed: !

I have never wanted to turn back to MH and T5 after running LED..:groupwavereversed: !

One thing I notice is China made led tend to be bluish compare to other...dun you?

For SPS specific LED, they usually use the same quatity of White and blue LED...(e.g. 32 x 3W White and 32 x 3W Blue)... :rolleyes:

fts-022012.JPG

Link to comment
Share on other sites

Hi Tang, good write up on the reef system LED lighting maker. :groupwavereversed: Btw, have you make any purchase with either LEDsea or Pharosled? I'm looking for those with programmable timer funtions to simulate day & night. Thks

bro bluemask,

Unfortunately, I got my DIY customed-build LED system two weeks before I got the chance to visit the Guangzhou Pets and Aquarium fair last year where I found the above mentioned LED system.. I was quite tempting to try out one set when I was there... but having invested much $$$$ on the 2 LemunAqua UltraBright and the DIY LED... I finally gave up the idea...

However, I am able to simulate the similar function by using the buid-in timer from the three LED sets... :superman:

post-16749-0-88752300-1330097278_thumb.j

:groupwavereversed:

fts-022012.JPG

Link to comment
Share on other sites

  • 3 weeks later...

wow bro ,thank for sharing your experience and soon will come visit you!

my eye will pop out once im there ..hehe, you got 3 tank to cope with ha.. bro!!!

i can really see the shifu in you bro...i'll pm you soon bro as this time quite busy..

Link to comment
Share on other sites

wow bro ,thank for sharing your experience and soon will come visit you!

my eye will pop out once im there ..hehe, you got 3 tank to cope with ha.. bro!!!

i can really see the shifu in you bro...i'll pm you soon bro as this time quite busy..

no problem...you are welcome... :cheers:

fts-022012.JPG

Link to comment
Share on other sites

  • 2 weeks later...
hi, How is the DIY LED you got? I am interested to get one from china.. possible to give an update on the light?

Sure bro... the DIY LED system is doing fine... in fact, it is performing better than what I expect a China product to be....

Here is the front view of the LED system

post-16749-0-52940500-1333092209_thumb.j

and this is viewing from the back of the tank....

post-16749-0-73782500-1333092308_thumb.j

fts-022012.JPG

Link to comment
Share on other sites

The following are the detail specification of the DIY LED system:

312W LED Light set (3 x 30W 15000K HighPower Superwhite LED + 36 x 3W White + 36 x 3W Blue + 6 x 1W 403 NM Violet)

3W White LED two types:

1) 18 x 3W (pure white) - 6500K 180-200lm 3.0-3.4v 700mA

2) 18 x 3W (cool white) - 11000-12000k 180-200lm 3.4-3.8v 700mA

3W Blue LED three types:

1) 12 x 3W Blue 445-450nm 30-45lm 3.7-3.8v 700mA

2) 12 x 3W Blue 450-460nm 30-45lm 3.7-3.8v 700mA

3) 12 x 3W Blue 460-470nm 30-45lm 3.4-3.8v 700mA

6 x 1W violet LED - 400-405nm 3lm 3.0-3.8v 350mA

3 x 30W HighPower White LED - 2700-15000K 2700-3000lm 30-36v 1050mA

The following are where all the LED were fired are about 20-30% intensity except the 3 x 30W..

post-16749-0-39096700-1333094216_thumb.j

fts-022012.JPG

Link to comment
Share on other sites

The system comes with a 3-way timer control where you can control the following 3 tracks:

Track 1 - 3 x 30W High Power White Led

Track 2 - 6 x 1W Violet Led

Track 3 - 36 x 3W Bule LED + 36 x 3W /White Led..

post-16749-0-48309000-1333094972_thumb.j

The setting of the timer is very flexible and easy to understand.. :thumbsup:

1) the first thing to do is set the actual date and time for the system

2) then you select the combination of the track you want to configure (e.g. track 1 only, or track 1 and track 2, or all tracks, etc...)

3) after selecting the tracks, you will then define the days/week assigned to the selected tracks (e.g. Mon only, or Mon, Wed, Fri, or All day, etc..)

4) once the selected tracks and days/week were defined, you then assign the timing to turn on/off the combination

fts-022012.JPG

Link to comment
Share on other sites

Thank you very much for the detail update! What i concern most is how are the corals doing under this light? May i have the contact?
The SPSs are doing fine...I did not experience any breaching of colour... in fact, some spcies such as Purple and Green Arco are doing better than before... Monti and digitata are growing .. for red and orgage Arco grow are slow but am able to keep the colour. :thumbsup: .. for mili results were varied - I have slight chnage in colour for pink and peace milli...but the rest of the colour are doing well.. For LPS, zoas are doing the best with bigger polys and growing fast on my live rock.... the only side effect so far based on my observation is the brain corals...they only open up at light - guess the light might be too much for them... :thumbdown: ..have tried to move then to few shaded location... still under observation...

I will try to upload some recent pictures as soon as I got my new toy installed and tested.. however, for your reference... the small signature picture of my FTS below was taken under the LED system...

fts-022012.JPG

Link to comment
Share on other sites

Delivery service smooth and fast .. :thumbsup:

post-16749-0-56327500-1333504507_thumb.j

I confirmed that this is much better than EMS...

Last time when I used EMS to save couples of $$$ for my DIY LED from China.. it took me almost 1 week (when the item reached Singpaore) to get my light set from SingPost/EMS.. :thumbdown: Screw-up big time (for two missed deliveries) and even suggest I pick up from the post office of my choice.. :chair:

now the package... :yahoo:

post-16749-0-34287300-1333505164_thumb.j

fts-022012.JPG

Link to comment
Share on other sites

What's the cost of DIYing your own LED bought from overseas?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Got these two modules of light sets directly from the manufactor as sample and testing...

post-16749-0-33877000-1333728674_thumb.j

I was surprised that the LED light sets packaging are very compact (35cm x 28cm x 9cm) and extremely light weight (about 1 kg)... :thumbsup:

post-16749-0-24093800-1333729316_thumb.j

The full LED package consists of two light modules (90W) and a wireless controller together with hanging kits... the supplier was very thoughful to provide a connecting rob (FOC) which can be used to connect the two modules..

fts-022012.JPG

Link to comment
Share on other sites

Pharos Use Manual for Wireless LED Light .pdfHere is another look at the LED system:

post-16749-0-29390600-1333730667_thumb.j

If you brought only a single light module... you might not necessary to purchase the wireless controller...

post-16749-0-24935300-1333730880_thumb.j

You can control the module using the touch buttons..

post-16749-0-43906100-1333731150_thumb.j

Attached user manual for easy reference..

Pharos Use Manual for Wireless LED Light .pdf

fts-022012.JPG

Link to comment
Share on other sites

  • SRC Member

nice stuff. sg speedpost and delivery base need to relook into their services. very lousy. i experience missed delivery before also and it is seriously inconvenient. 3days from china to sg but more than a week within sg due to miss delivery.

Link to comment
Share on other sites

The following are the detailed specification and features:

post-16749-0-40679100-1333764319_thumb.j

Specification:

Size: L30cm*W13cm*4.1cm

Power: ~90W

Voltage: AC100V-240V

LED:

4 X Cree XPE Blue - 3W/PCS

12 X Cree XPE Royal Blue - 3W/PCS

2 X CREE XPG Warm White - 5W/PCS

6 X CREE XPG Neutral White - 5W/PCS

Main Features:

* 2-channel capable

* Active Cooled With Fans And Quiet

* Temperature Probe Design For High Temperature Protection

* Circulate Between Day and Night Automatically

* More Light Source Available

* Integrated Wireless Control Module

* Functions of Wireless Controller as Followings

1. Advanced Control For Sunrise/Sunset/Moonlight

2. Cloud Simulation

3. Lunar Cycle

4. Dimmable

5. Setting Night Time Length at Your Will

* 1 Year Wattanty

* Long life of 50,000 Hours

fts-022012.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...