Jump to content

V_C's tank "3rd generation"


Recommended Posts

  • SRC Member

Have to empty the tank out and seal from the inside liao, don't seal it from the outside. It ususally starts a drops and trickles, then without warning it will burst like a waterfall. Must plan for temporary housing arrangement for your corals and fishes liao.

My 1.5ft nano cube

My 24G nano tank (Decommed)

I can picture in my mind a world without war, a world without hate.

And I can picture us attacking that world, because they'd never expect it.

-- Jack Handey

Link to comment
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Boy, its no joke hor....

really transfer your LS out. Dry the tank, rework on the silicon.

if you dunno how, get some professional to do it.

Rectify it ASAP.

Last thing you want is for water to get into any electrical points and cause a shock to anyone.

salt water flooding the house is no joke too... floor will be sticky and requires thorough cleaning.

it somehow to crack open up and shatter the glass, its even more troublesome and could cause injury.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

Boy, its no joke hor....

really transfer your LS out. Dry the tank, rework on the silicon.

if you dunno how, get some professional to do it.

Rectify it ASAP.

Last thing you want is for water to get into any electrical points and cause a shock to anyone.

salt water flooding the house is no joke too... floor will be sticky and requires thorough cleaning.

it somehow to crack open up and shatter the glass, its even more troublesome and could cause injury.

Ok will get someone to do it for me asap... :(

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

all the best bro. would suggest getting professional help as water fall from tank to ground is not a joke (have experience 3x..)

else to put your mind at ease,house the corals in temp toyogo / blue tub and change a new tank set..

the feeling of un-secureness thinking the tank BOOMZ is not nice :thumbdown:

jiayou bro! :friends:

Link to comment
Share on other sites

  • SRC Member

all the best bro. would suggest getting professional help as water fall from tank to ground is not a joke (have experience 3x..)

else to put your mind at ease,house the corals in temp toyogo / blue tub and change a new tank set..

the feeling of un-secureness thinking the tank BOOMZ is not nice :thumbdown:

jiayou bro! :friends:

Thanks for ur encouraging words, almost cried.. :-P haha will try to get AM ppl to help me with it... Meanwhile will keep u guys updated! Thanks for all the moral support... Really appreciate it from all who had posted regarding this prob.. Owe u guys one

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

good luck bro.. all the best!

Thanks bro!

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Finally got some silicon already, but do not know where to start... Any bros can help?

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Everything's all well now! Back to normal, did some rescaping... And here's FTS

post-14611-12767610802897_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Found my "rare" coral again aft it melted when I claimed it from my friend during crisis... :pinch:

post-14611-12767612239891_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

nice and clean sandbed!!!! so leak confirm settled??

Yes! Orca's silicon is effective with a 'reasonable' price tag when it comes to emergency... <_< Thks for complimenting my sandbed, its work from 12am to 4am the other day...

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Zoas... ^_^ I think i caught the zoas flu bug... :lol: :lol: :lol:

post-14611-12767614665337_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

More zoas... :blush: Sorry i bokehed out the eagles eye behind...

post-14611-12767615036207_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Added a pair of cardinal fish... Hope my tank will be more lively with fishes... :whistle

post-14611-12767616215728_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

My green prata, and sweet memories of the red prata... :cry:

post-14611-12767616607018_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Ok guys not much to update, leak is very much under control... Might consider getting new toys already since my hands are itching... Should I get the controllable wavemakers or upgrade my light set to the hqi 150w mh light set? Any comments will be considered! :P

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

how did you fix the leak?

and by very much under control do you mean it's still leaking but at a much lesser rate?

Nope no more leak... Fixed it using Orca's underwater black Silicone... :heh:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Added a frag of acro... Need help with ID searched the net and couldn't find any which looks similar... :ThanxSmiley:

post-14611-12771983856755_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Added a frag of acro... Need help with ID searched the net and couldn't find any which looks similar... :ThanxSmiley:

ID anyone? :unsure:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Did a night shoot session with my tank! here are the results... :eyebrow: :eyebrow: :eyebrow:

This is the unidentified SPS under LED moon lights... :yeah:

post-14611-12774388933613_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

And this brain under moonlights... :heh:

post-14611-12774394740398_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Also ppl interested in getting wavemakers I hav hydor k-nano and k-2 will post on pasar malam when ready for sale... Interested buyers can reserve first via PM thanks a mil!

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

welcome back bro! gd to noe tat u r stil in tis hobby :D


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...