Jump to content

Low Ca, Mg, dKH. What to add first??


limsc
 Share

Recommended Posts

  • SRC Member

Hi Guys,

I just measure my tank 3 times over the last 3 months. My Ca,Mg,dKH level still very low.

Currently using NSW for WC. Adding distilled water and IWARNA top-up to counter evaporation.

Ca: ~350 ppm

Mg: ~1050 ppm

dKH: ~5.5

Yesterday just got some additives MgCl2, CaCl, NaHCO3 from Gary bulk order.. Thanks to dreamlover.. :ThanxSmiley:

Thus was thinking to add these additives slowly to boost up.

But the question is what element to boost up first?

Also, can I boost up 1 element to the required level (eg, dKH to 7) before targetting on another element?

Thanks for any advice.

Link to comment
Share on other sites

Since you are dosing in 3 parts, you may want to try dosing using Randy Holmes method:

"To initiate dosing, first adjust calcium and alkalinity to roughly their correct ranges. This may require a substantial dose of just the calcium part if calcium is low (e.g., below 380 ppm). I would suggest targeting calcium between 380 and 450 ppm, and alkalinity between 2.5 and 4 meq/L (7-11 dKH; 125-200 ppm calcium carbonate equivalents)."

See source below more more details. ;)

Source:

http://reefkeeping.com/issues/2006-02/rhf/index.php

"Reefs, like forests, will only be protected in long term if they are appreciated"
Dr. J.E.N. Veron
Australian Institute of Marine Science


-----------------------------------------------------------------------

Member of:

post-1182-0-60431600-1322062247_thumb.jp

post-2241-0-43391700-1354511230.png

UEN: T08SS0098F
Please visit us here: http://www.facebook....uaristSocietySG
Facebook Group: http://www.facebook....gid=34281892381

Link to comment
Share on other sites

  • SRC Member

Thanks Gouldian, divinesloth.

I tried reading up a little bit, seems to suggest dKH and Calcium 1st but then IF without enough Mg, Ca will precipitate out. :(

Not sure if the precipitation occurs when only high Ca(>420ppm) meet with low Mg

Or that Ca will precipitate in general without enough Mg.

If the second case is true, that means I can't increase Ca to the required level without adding Mg??

Dreamlover, thanks for the additives..

If needed more, maybe got to buy some from you if you got spare?

My main and sump tanks volume is ~160gallons without rocks. Got a lot of water to boost up the elements. :(

Link to comment
Share on other sites

It is cheaper n easier to do massive water change with good salt water ( good parameters) than to add the additives with constant monitoring.

NSW tend to have lower levels of the parameters, why don't u measure them and check the levels.

hth

Second that. Do water change with good quality salt mix. All your levels will slowly increase and you do not need to worry about chemical imbalances.

Always something more important than fish.

http://reefbuilders.com/2012/03/08/sps-pico-reef/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...