SRC Member riotriot Posted December 27, 2016 Author SRC Member Share Posted December 27, 2016 2 minutes ago, Jairus said: thanks for sharing! i personally like the small profile of the light too. but your lights only on for 4 hours a day (excluding night time)? Yes plus sunrise & sunset timing are set on 2 hours to ramp up and down. Yes by 7pm it's only the royal blue sort of moonlight conditions, the corals still open up actually. Quote Link to comment Share on other sites More sharing options...
SRC Member kenyee Posted December 27, 2016 SRC Member Share Posted December 27, 2016 Bro how old is ur tank? Quote @ 291213 Updated video: Kenyee FOWLR http://m.youtube.com/my_videos Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted December 27, 2016 Author SRC Member Share Posted December 27, 2016 Bro how old is ur tank? A little more than 6 months Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member Jairus Posted December 28, 2016 SRC Member Share Posted December 28, 2016 22 hours ago, riotriot said: Yes plus sunrise & sunset timing are set on 2 hours to ramp up and down. Yes by 7pm it's only the royal blue sort of moonlight conditions, the corals still open up actually. haha nice, lesser hours of light means lesser algae too haha 1 Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted December 29, 2016 Author SRC Member Share Posted December 29, 2016 Manage to get a shot of my wrasse. Anyone knows the name of it? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 6, 2017 Author SRC Member Share Posted February 6, 2017 Quote Link to comment Share on other sites More sharing options...
Seano Posted February 6, 2017 Share Posted February 6, 2017 Nice tank! We have a very similar set up except I went for the AL30 chiller which seems to hold up ok. Looking forward to more updates!Sent from Singapore Reef Club mobile app 1 Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 7, 2017 Author SRC Member Share Posted February 7, 2017 Quote Link to comment Share on other sites More sharing options...
SRC Member Ashtrax Posted February 7, 2017 SRC Member Share Posted February 7, 2017 Can post your light setting of your prime? where you get the outlet of the pipe flow where you get it? Quote Link to comment Share on other sites More sharing options...
SRC Member finind Posted February 7, 2017 SRC Member Share Posted February 7, 2017 Thought of getting this nuvo nano 10. Do you guys find the price steep at $175 (tank only, F&M)? My old tank already used for 5 years. How often should we change tank in case the glue give way? Just bought the AOL AL60... seems ok. Noise level is much lower than HC-100a but still the fan sound is not whisper quiet Need it to struggle with my 50L tank for a while till I get the 30L tank Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 7, 2017 Author SRC Member Share Posted February 7, 2017 1 hour ago, Ashtrax said: Can post your light setting of your prime? where you get the outlet of the pipe flow where you get it? Hi Ash, here's my preset but not sure if its any good. Didnt quite understand your 2nd question =) AI Preset.aip Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 7, 2017 Author SRC Member Share Posted February 7, 2017 59 minutes ago, finind said: Thought of getting this nuvo nano 10. Do you guys find the price steep at $175 (tank only, F&M)? My old tank already used for 5 years. How often should we change tank in case the glue give way? Just bought the AOL AL60... seems ok. Noise level is much lower than HC-100a but still the fan sound is not whisper quiet Need it to struggle with my 50L tank for a while till I get the 30L tank Hi hi! It's my first tank, and if i had a 2nd chance, I would get a bigger tank..haha. I think depends on how well the tank is made for the lifespan of the glue. Yeah AL60 is great but mine is a little wonky now. used to maintain the temperature, now it fluctuates between 2-3degress. Why you want to downsize your tank may I ask? Quote Link to comment Share on other sites More sharing options...
SRC Member finind Posted February 8, 2017 SRC Member Share Posted February 8, 2017 On 2/7/2017 at 4:17 PM, riotriot said: Hi hi! It's my first tank, and if i had a 2nd chance, I would get a bigger tank..haha. I think depends on how well the tank is made for the lifespan of the glue. Yeah AL60 is great but mine is a little wonky now. used to maintain the temperature, now it fluctuates between 2-3degress. Why you want to downsize your tank may I ask? fluctuates between 2-3degress? as in? AL60 seems no problem in cooling my 50+ litre tank. Those fans inside look like PC fans! .. ha, can replace myself. Wonder what technology this chiller is using? not just fan and heat sink/fins ba? wanted to downsize cos easier to maintain perhaps ... try not to get too tire maintaining the tank also lower maintenance cost actually even thought of stopping but seems like downsize should address my concern and get to keep my coral 1 Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 8, 2017 Author SRC Member Share Posted February 8, 2017 2 hours ago, finind said: fluctuates between 2-3degress? as in? AL60 seems no problem in cooling my 50+ litre tank. Those fans inside look like PC fans! .. ha, can replace myself. Wonder what technology this chiller is using? not just fan and heat sink/fins ba? wanted to downsize cos easier to maintain perhaps ... try not to get too tire maintaining the tank also lower maintenance cost actually even thought of stopping but seems like downsize should address my concern and get to keep my coral As in the chiller cant maintain the temperature that I set. It will swing 2-3 degrees above the set temperature. Mine's only 10gallon but it hard to maintain a stable water parameter. A bigger tank would be more forgiving if I'm not wrong but also would cost more. =( Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 11, 2017 Author SRC Member Share Posted February 11, 2017 Quote Link to comment Share on other sites More sharing options...
Jack 123456 Posted February 12, 2017 Share Posted February 12, 2017 How did you connect the chiller? connect through return pump?? Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 12, 2017 Author SRC Member Share Posted February 12, 2017 1 hour ago, Jack 123456 said: How did you connect the chiller? connect through return pump?? The chiller has a pump by itself. Taking the water from the last chamber to chiller and pumping it back again. Quote Link to comment Share on other sites More sharing options...
Jack 123456 Posted February 15, 2017 Share Posted February 15, 2017 hi what return pump are you using? and any pump recommendations for IM 10 with a price tag under 40$ and which as enough power to go through a chiller sitting under the cabinet? thanks Quote Link to comment Share on other sites More sharing options...
Jack 123456 Posted February 15, 2017 Share Posted February 15, 2017 hi what return pump are you using and any pump recommendations for IM 10 with a price tag under 40$ and which as enough power to go through a chiller sitting under the cabinet? also do you think the flow stream nozzle is a valuable purchase? thanks Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 15, 2017 Author SRC Member Share Posted February 15, 2017 3 hours ago, Jack 123456 said: hi what return pump are you using and any pump recommendations for IM 10 with a price tag under 40$ and which as enough power to go through a chiller sitting under the cabinet? also do you think the flow stream nozzle is a valuable purchase? thanks I'm using this for my return pump, http://www.sicce.com/prodottiDettaglio_eng.php/prodotto=syncra-nano-wet-dry-140-430-lh/idprodotto=97 And for chiller pump I'm using this http://www.sicce.com/prodottiDettaglio_eng.php/prodotto=micra/idprodotto=37 I think its about $23 from FnM. I like this brand actually. Haven't tried other brands so I'm not sure about it. You should buy a spare pump and keep it in case anything happens. Thats what happen to my stock pump and luckily I had the Sicce. Quote Link to comment Share on other sites More sharing options...
SRC Member Ashtrax Posted February 17, 2017 SRC Member Share Posted February 17, 2017 On 2/7/2017 at 4:13 PM, riotriot said: Hi Ash, here's my preset but not sure if its any good. Didnt quite understand your 2nd question =) AI Preset.aip From this image can't really tell how you plot your light setting. you set it yourself or you get it from the net? Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 17, 2017 Author SRC Member Share Posted February 17, 2017 1 hour ago, Ashtrax said: From this image can't really tell how you plot your light setting. you set it yourself or you get it from the net? Hi Ash, Light starts from 10am ramping up to the above setting at 12pm. From 4pm to 8pm it ramps down to nightmode which I set ( UV20% V20% RY40% B20% G0% DR0% CW0% ) From 8pm to 1am everything slow goes to 0% Its my own setttings actually but I guess it really up to your own preference. Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 17, 2017 Author SRC Member Share Posted February 17, 2017 Quote Link to comment Share on other sites More sharing options...
SRC Member Jimmy75 Posted February 17, 2017 SRC Member Share Posted February 17, 2017 I'm using this for my return pump, http://www.sicce.com/prodottiDettaglio_eng.php/prodotto=syncra-nano-wet-dry-140-430-lh/idprodotto=97 And for chiller pump I'm using this http://www.sicce.com/prodottiDettaglio_eng.php/prodotto=micra/idprodotto=37 I think its about $23 from FnM. I like this brand actually. Haven't tried other brands so I'm not sure about it. You should buy a spare pump and keep it in case anything happens. Thats what happen to my stock pump and luckily I had the Sicce. Both pumps in last chamber? Quote Link to comment Share on other sites More sharing options...
SRC Member riotriot Posted February 17, 2017 Author SRC Member Share Posted February 17, 2017 9 minutes ago, Jimmy75 said: Both pumps in last chamber? Yes sir. Maybe there's a better way but thats what i did. =) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.