Jump to content

My humble algae filled 4ft reef tank.


sankar27
 Share

Recommended Posts

Hiyo people!:yahoo:

I am in this hobby for more than 1 year, have always been a silent viewer to learn from the rest of the peeps here. 

I have a 4X 2 X 2 ft. 

I have rescaped my tank on some time end of Jan 2017 and basically went through a mini cycle so im now facing the algae issue again. :(

With my new scape, i think it might be a good time to start logging my activities and progress of my tank while trying to combat the algae issue. 

Well, here we go.

  • Like 1
Link to comment
Share on other sites

20170206_205445-01.jpeg

Equipment list:

1. Tank: 4 feet long 2 feet wide and 2 feet tall 3-sided 12mm glass. 

2. Sump: 3 feet long 1.5 feet wide and 1 feet 8mm glass

3. Lights: 2 units of Radion XR30w pro LEDs.                              2 units of Hydra 52 HD LEDs. 


4.Skimmer: Deltec SC1455 

5. Return pump: Jebao 12k

6. Wavemaker:

Maxspect Gyre XF150 x1, Maxspect Gyre XF130 x1,Jebao RW 8 x 1

8. Dosing pump : Jebao DP-4 dosing pump.

9. Media: 3 marine pure blocks, 3 boxes of marine pure sphere. 

10. Scape: >50kg of live rocks. Threw away appx +/- 50 kg when i rescaped. 
 

Link to comment
Share on other sites

Just sharing my ssc before a kh swing in my tank , it was a pretty bitch until recently before i rescape, my tank went through a kh swing where kh dropped as low as 4.5 dkh.

FB_IMG_1486438229140.jpg

Now its a pale strawberry with stn from the base. It's recovering really slowly at the moment. *Fingers crossed* Learnt it the hard way to do weekly testing:chair:. Guys, will it ever heal to like before ?  

Link to comment
Share on other sites

wow... I admired your bravery. I'm also a silent viewer. I have a 3ft tank but keep mainly fishes and abit of Yuma. My tank looks pale in comparison with yours. However I like to do rescaping to my tank and have started preparation for that. But still I'm worried I might kill my live stock. Any advise?

Link to comment
Share on other sites

2 hours ago, Beagle1 said:

wow... I admired your bravery. I'm also a silent viewer. I have a 3ft tank but keep mainly fishes and abit of Yuma. My tank looks pale in comparison with yours. However I like to do rescaping to my tank and have started preparation for that. But still I'm worried I might kill my live stock. Any advise?

Fortunately this time round I had no corals that died on me, only lost of colours. My rocks were out of water for around 2 hours. That probably was one of the factors why my tank went through another cycle. I did a larger then usual water change(almost 3 times as much) and complemented it with half a bottle of fritz live bacteria. 

Link to comment
Share on other sites

Not to forget, it's better to Google ideas of how you want your scape to be first.  I did mine last minute without planning, and got very lost about 10 mins into rescaping.  I was lucky my girlfriend helped me out and saved the day! Otherwise I believe it would have been longer then just 2 hours!

Link to comment
Share on other sites

1 hour ago, sankar27 said:

Not to forget, it's better to Google ideas of how you want your scape to be first.  I did mine last minute without planning, and got very lost about 10 mins into rescaping.  I was lucky my girlfriend helped me out and saved the day! Otherwise I believe it would have been longer then just 2 hours!

thks for the advise...

Link to comment
Share on other sites

  • SRC Member

If possible rescape without removing the rocks from the water..my FOWLR tank had rescaped dunnoe how many times le n no such thing like mini cycle.. Heez..anyway, nice suggestion to plan ur scape roughly taking into considersation ur rocks pattern..google really got a lot of nice scape..cheers n happy reefing :)

@ 291213

Updated video: Kenyee FOWLR

http://m.youtube.com/my_videos

Link to comment
Share on other sites

17 minutes ago, kenyee said:

If possible rescape without removing the rocks from the water..my FOWLR tank had rescaped dunnoe how many times le n no such thing like mini cycle.. Heez..anyway, nice suggestion to plan ur scape roughly taking into considersation ur rocks pattern..google really got a lot of nice scape..cheers n happy reefing :)

Too much cleaning up around the house after rescaping.  Will probably not rescape anytime soon. Next rescape will be done when I upgrade!:yahoo:

Link to comment
Share on other sites

U can run a fr with gfo media like rowaphos to absorb phosphate from ur tank. Btw ur po4 reading is ok, dun hv to lower any further. What are u using to read po4?


Sent from Singapore Reef Club mobile app

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

1 minute ago, Admiraltian said:

U can run a fr with gfo media like rowaphos to absorb phosphate from ur tank. Btw ur po4 reading is ok, dun hv to lower any further. What are u using to read po4?


Sent from Singapore Reef Club mobile app

I'm alr running a fr with rowa phos.  But my po4 readings are not stable, sometimes higher, sometimes lower. Using a hanna checker to check. Is it because my no3 readings are undetectable?

Link to comment
Share on other sites

What is your red LED setting?


Sent from my iPhone using Tapatalk

Display Tank : 66" x 36" x 24"
Lights: 3 X Radion XR30W PRO Gen3, 
            2 X Radion XR30W Gen1
Wave Maker : 2 X MP40, 1 X RW20, 1 X RW15
Return Pump : 2x DCT12000

Frag Tank : 24" x 24" x 16"
Lights : 1 X Radion XR30W Gen1
Wave Maker : 1 X RW8
Return Pump : 2 X DCS5000

Sump : 72" x 24" x 16"
Chiller : Hailea 1HP
Skimmer : Skimz SM201.
Dosing Pump : Bubble Magus 11 Channels
Calcium Reactors : Schuran Jetstream 1

Link to comment
Share on other sites

Reduce to below 10% for red leds.


Sent from my iPhone using Tapatalk

Display Tank : 66" x 36" x 24"
Lights: 3 X Radion XR30W PRO Gen3, 
            2 X Radion XR30W Gen1
Wave Maker : 2 X MP40, 1 X RW20, 1 X RW15
Return Pump : 2x DCT12000

Frag Tank : 24" x 24" x 16"
Lights : 1 X Radion XR30W Gen1
Wave Maker : 1 X RW8
Return Pump : 2 X DCS5000

Sump : 72" x 24" x 16"
Chiller : Hailea 1HP
Skimmer : Skimz SM201.
Dosing Pump : Bubble Magus 11 Channels
Calcium Reactors : Schuran Jetstream 1

Link to comment
Share on other sites

1 minute ago, JasonLim said:

Reduce to below 10% for red leds.


Sent from my iPhone using Tapatalk

I'm using the preset ab+ and didn't change anything and copied the exact same thing into my hydra settings. Reducing the reds is for algae growth or po4?

Link to comment
Share on other sites

Reduce red is for algae growth. Try to reduce white below 40% too.


Sent from my iPhone using Tapatalk

Display Tank : 66" x 36" x 24"
Lights: 3 X Radion XR30W PRO Gen3, 
            2 X Radion XR30W Gen1
Wave Maker : 2 X MP40, 1 X RW20, 1 X RW15
Return Pump : 2x DCT12000

Frag Tank : 24" x 24" x 16"
Lights : 1 X Radion XR30W Gen1
Wave Maker : 1 X RW8
Return Pump : 2 X DCS5000

Sump : 72" x 24" x 16"
Chiller : Hailea 1HP
Skimmer : Skimz SM201.
Dosing Pump : Bubble Magus 11 Channels
Calcium Reactors : Schuran Jetstream 1

Link to comment
Share on other sites

8286b481d1fa70111aff7b9948b4ee52.jpg


Sent from my iPhone using Tapatalk

Display Tank : 66" x 36" x 24"
Lights: 3 X Radion XR30W PRO Gen3, 
            2 X Radion XR30W Gen1
Wave Maker : 2 X MP40, 1 X RW20, 1 X RW15
Return Pump : 2x DCT12000

Frag Tank : 24" x 24" x 16"
Lights : 1 X Radion XR30W Gen1
Wave Maker : 1 X RW8
Return Pump : 2 X DCS5000

Sump : 72" x 24" x 16"
Chiller : Hailea 1HP
Skimmer : Skimz SM201.
Dosing Pump : Bubble Magus 11 Channels
Calcium Reactors : Schuran Jetstream 1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...