SRC Member SBS_Transit Posted November 24, 2003 SRC Member Share Posted November 24, 2003 hi,i just got my 10g tank,L-60cm,W-22cm,H-30cm.i want to diy my hood, any one can help ? got any links ? Quote SBS_Transit Link to comment Share on other sites More sharing options...
SRC Member shiraz Posted November 25, 2003 SRC Member Share Posted November 25, 2003 what my dad did was to give measurements to the bangladeshi guys at the construction site to ask them to make it... since they have abundance of wood all over the place... but the workmanship would not be too good lah... there were nails all over the place but it could fit perfectly.. my new hood was made by a contractor... just get any renovation contractor and they would do it for u Quote The world is such a wicked place,war btween the human race. People work to earn their bread,while across the sea they're counting dead Link to comment Share on other sites More sharing options...
SRC Member SBS_Transit Posted November 25, 2003 Author SRC Member Share Posted November 25, 2003 what are the tools needed to diy the hood ? Quote SBS_Transit Link to comment Share on other sites More sharing options...
SRC Member shiraz Posted November 25, 2003 SRC Member Share Posted November 25, 2003 wood, nails, hammer, screws, screwdriver, contact glue, hinges, sandpaper, file Quote The world is such a wicked place,war btween the human race. People work to earn their bread,while across the sea they're counting dead Link to comment Share on other sites More sharing options...
MNCL Posted December 3, 2003 Share Posted December 3, 2003 I believe, just by getting 4 pcs of plank of correct size will do. Ur hood need not be covered as long as the top of the hood is higher than an average singaporean height. U can also nail 4 pcs of wood inside the hood to rest ur equipment at the hood. This will act as a shelf. Advantages of making an open air hood is that u have the opportunity to make a hanging mh light system neatly above ur tank. Besides, heat generated from ur lighting system can escape thru the open cover. Its just my 2cts worth of opinion. CHEERS! Quote Link to comment Share on other sites More sharing options...
SRC Member reefer guy Posted December 3, 2003 SRC Member Share Posted December 3, 2003 any idea wer to get practically priced quality wood for hoods that can withstand heat and salt? Quote Link to comment Share on other sites More sharing options...
SRC Member Tanggy Posted December 3, 2003 SRC Member Share Posted December 3, 2003 All you need is a hammer, wood screws, liquid nails (contact glue not suitable. get the wood glue but must be water resistant). Go to a plank cutter in kelantan lane or defu lane and get then to cut the wood to size. Just joint into a rectangle with the inner circumfrence larger then your tank by a bit. Then put wood corners to hold the hood on tank. As for the finish, you have 2 cheap options. Sticker from those DIY store or just sand down and laquer. Both method about 10-20 dollars. The wood should be 10-20. Quote Link to comment Share on other sites More sharing options...
MNCL Posted December 3, 2003 Share Posted December 3, 2003 any idea wer to get practically priced quality wood for hoods that can withstand heat and salt? Reefer Guy, All reasonably thick wood can withstand salt n heat. Dont used plywood as the ply with warp in a matter of time. Solid wood shouldnt have any problem. If for making the hood only, ordinary wood plank will do. I am making an assumption that the wood u used is not in constant contact with any form of water even from the beating of the water bubbles of ur aquarium. CHEERS! Quote Link to comment Share on other sites More sharing options...
SRC Member reefer guy Posted December 3, 2003 SRC Member Share Posted December 3, 2003 thanks bro! i have been thinking of diy-ing my hood but dont know wer to get wood.. was hoping to get precut sizes so all i need to do is assmbly.... any idea wer? thanks! Quote Link to comment Share on other sites More sharing options...
SRC Member Nickel Posted December 3, 2003 SRC Member Share Posted December 3, 2003 Hi, mind I borrow thread to ask a similar question on solid wood for cabinet ? Can 'solid wood' strong enough and lasting to support a 5ft marine tank given the salt water and weight ? Was advised to go for Chennai wood but it is very expensive compared to solid wood. Quote Link to comment Share on other sites More sharing options...
terryansimon Posted December 3, 2003 Share Posted December 3, 2003 chennai wood is supposedly the only wood that is marine proof the longest. supposedly. Quote Link to comment Share on other sites More sharing options...
jhansolo Posted December 3, 2003 Share Posted December 3, 2003 dont know wer to get wood.. was hoping to get precut sizes This is my first post ... as for pre-cut wood you can check with your local hardware shop. First design the hood to exact measurement then show it to the hardware shop they should be able to supply the wood. The other place I know is Opposite the New World Centre (the place that they sell a lot of kitchen ware in Jalan Besar) there is a shed and they will help to cut the wood for you, but you have to buy the whole plank which is 4 x 6 I think. The other thing that I would like to embark is working with arcylic, it is pretty fun too. Quote Link to comment Share on other sites More sharing options...
SRC Member reefer guy Posted December 3, 2003 SRC Member Share Posted December 3, 2003 yeah... was thinking of acrylic too... but as too its resistance against heat from metal halide... unsure... aside from which it is ex.... can anybody enlighten this issue; would acrylic withstand heat from mh? thanks! Quote Link to comment Share on other sites More sharing options...
SRC Member ervine Posted December 3, 2003 SRC Member Share Posted December 3, 2003 yeah... was thinking of acrylic too... but as too its resistance against heat from metal halide... unsure... aside from which it is ex.... can anybody enlighten this issue; would acrylic withstand heat from mh? thanks! No.. I doubt it woud tahan MH... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.