Jump to content

WTS JBJ 28G nano cube due to upgrading


yongshun
 Share

Recommended Posts

Hi all,

Want to sell the following as a set. (only as a set, definitely no separate selling of equipments). Used for ard 8-9 mths only. Reason for selling is bcos upgrading to a 3 ft tank. This is basically a plug n play system in terms of equipment setup as it is quite complete. Suitable for keeping SPS also. BT PLS CYCLE THE TANK FOR AT LEAST A WK. Everything is in tip top condition. Seeing is believing. No horse run!

- JBJ 28g nano-cube HQI

- 150W 14k MH

- changed the original pumps with 2 eheim return pumps. should be compact 1000 if im nt wrong.

- directional flow nozzles on each side of the tank

- protein skimmer (counter current) with air pump

- integrated centre overflow

- integrated cooling fans (3000 rpms)

- flame retardant ABS housing canopy

- integrated thermal protector for canopy

- removal filter media basket with handle and sliding door for easy access

- estimated 13-15kg of coraline encrusted live rocks (bring ur own stylofoam box or pail)

- hydor k1 (fully encrusted with coraline), under warranty with AM. was bought in Sep 08

- seio 620

- live sand (ard 1-1.5 inch high)

- cabinet

- hailea 150A 1/10 chiller (think shd be still under warranty from Aquastar)

- magnetic srubber

- digital thermometer

for more info, can check out my tank thread at

http://www.sgreefclub.com/forum/index.php?showtopic=72563

Total selling price is $488 as most of the equipments are quite new, inclusive of all the hoses and even the water if you want, distilled water mixed with TM pro reef bt bring ur own jerry cans. Pls arrange for your own transport. Unable to provide. Can be squeezed into a taxi, thats wat i did :) But can only collect from me after the arrival n cycling of my new tank, which is around 1 mth after cny so that i can transfer my livestocks over. sms me at 91856098. viewing location is at amk ave 4. thks


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Have seen his tank in person before. Definitely in good condition. Good for one who wants to keep a nano.

Very tempting offer, I'd take it, but I will be out of town from after CNY till March.

Link to comment
Share on other sites

Thks for those who haf shown a lot of interest. However, pls take note that im nt planning to sell the equipments separately. Prefer to sell it as a whole set, reason being that it will be easier for the one who is buying the tankset frm me to start the whole thing running :) unless sum1 is willing to get the tank set w/o the chiller. And pls note that the earliest i can release my tankset will be in early march, as my new tank is unable to deliver before cny. They can only delivery in mid feb and I will need 2 wks to cycle my new tank b4 i can transfer my livestocks over.

cheers :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Thks for those who haf shown a lot of interest. However, pls take note that im nt planning to sell the equipments separately. Prefer to sell it as a whole set, reason being that it will be easier for the one who is buying the tankset frm me to start the whole thing running :) unless sum1 is willing to get the tank set w/o the chiller. And pls note that the earliest i can release my tankset will be in early march, as my new tank is unable to deliver before cny. They can only delivery in mid feb and I will need 2 wks to cycle my new tank b4 i can transfer my livestocks over.

cheers :)

Hi bro, I'll see you next week for a viewing, serious interest in full set.

Link to comment
Share on other sites

Hi bro, I'll see you next week for a viewing, serious interest in full set.

thks bro, juz let me know when u coming :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

upz


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

hi bro i am interested can view tml morning?

ya sure..juz sms me lor...i will be at hm 2molo mrn


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

upz


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

UPZ

thks for the upz bro ;)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

  • SRC Member

juz a piece of advise b4 anything happen, u may wan to hold on to this tank for a longer time. dun try to shift all ur ls to the new tank right after cycling. the sudden high bioload may cause ur perimeters to go haywire or No3 shoot up faster than rocket....that the reason why ppl also tell newbie to stock up slowly when they juz set up the tank.... i took 1 mth to transfer my ls from my 2ft to 3ft. of cos this 1 mth abit siong cos need to run 2 chillers, skimmers.......

Link to comment
Share on other sites

juz a piece of advise b4 anything happen, u may wan to hold on to this tank for a longer time. dun try to shift all ur ls to the new tank right after cycling. the sudden high bioload may cause ur perimeters to go haywire or No3 shoot up faster than rocket....that the reason why ppl also tell newbie to stock up slowly when they juz set up the tank.... i took 1 mth to transfer my ls from my 2ft to 3ft. of cos this 1 mth abit siong cos need to run 2 chillers, skimmers.......

thks bro for the advise. will take note of it :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Hey bro, PMed you regarding a viewing tonight, not sure if it got through, PM system didn't seem to be working right.

SMS me if you received pm :eyebrow:

Link to comment
Share on other sites

thks for all the support. thread closed. reserved by a frenly reefer :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...