Jump to content

MWTS Controllers & items. Looking for 6055 also.


Solo77
 Share

Recommended Posts

Hi, might want to sell the following controllers:

Pin Point pH controller - Brand new

Pin Point pH monitor - Brand new

Macro ORP controller - need to change probe. Can measure positive and negative reading - to my understanding.

One controller which can controll either pH or ORP - need to change probe

Selling above as items were purchased for new project. Might be going for new toy, hence will try to sell them and if no taker, might just keep them and use them. Please quote reasonably and send pm to me. I reserve the rights to sell to anyone i prefer. Pilot and super ridiculous bargain hunter will be ignored.

1. Still have a 3ft 4 tubes AM retrofit lightset to sell at $150. Individual reflector. Comes with used tubes. Has 2 power sockets to control 2 tubes respectively.

2. One 2 ft by 1 ft by 1.5ft normal fish tank with wooden stand for sales - $20

3. Jebao and H n H canister filter and dophin overhead filters for sales - ranging 20 to 40.

4. Reef Glove from Reef depot - RP is $35, selling $20(got 2 hence selling one)

5. Hydrometer - floating or scale type.

6. Nano hang on filter x 2

7. Deltec PF600s. The ab3000 needs new impellor. Selling 300.

Also looking for good condition 6055. Prefer the set to be purchased from RD. If you have to let go, please pm me the condition and price you are looking for. Thanks.

.....got quite a number of air pumps for sales also....

Thanks for your attention.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Hi bro, maybe i should start a bid system here but no timeline. Me trying to raise funds for new project....if this bid fails, i will abort and use them. I am open to offer but no ridiculous offer. I reserve the rights to stop the bid anytime and sell to anyone i preferred. Appreciate your understanding on this. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Update:

1. Pin Point monitor has received offer for $100 - By Bro LXXXXXX - 9xxxx249 - Thanks for the understanding

2. Reef Glove from RD - reserved for Bro DXXXXX - 9xxxx469

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Update:

1. Pin Point pH monitor has received offer for $100 - By Bro LXXXXXX - 9xxxx249 - Thanks for the understanding

2. Reef Glove from RD - reserved for Bro DXXXXX - 9xxxx469

3. Pin Point pH controller has received offer for $200 - By Bro TXXXX.

also Got a 3ft by 1 ft by 1.5 ft sump with 2 compartment(ratio is 2:1). Selling $20. Collection at sengkang.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

upz for my search and sales....thanks for your attention

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Supporter

UpzZ for u bro ;)

My little ocean
Mix Reef-Main tank 30 inches Length x 32 inches Width x 18 inches Height
2 X Skim DC return pump
Aquabee 2000 chiller feeder

Hailea 1/2 Chiller
1 X Tunze nano wavebox

2 X EcoTech Marine Vortech MP10W
Deltec skimmer - Internal
Lumenarc 400watt 12K Reeflux

8 X T5 ATI Powermodule
Prolifux control with external touchscreen display
Refugium keeping chaeto

Link to comment
Share on other sites

Thanks bro tansk.

Update:

1. Pin Point pH monitor has received offer for $100 - By Bro LXXXXXX - 9xxxx249 - Thanks for the understanding

2. Reef Glove from RD - reserved for Bro DXXXXX - 9xxxx469

3. Pin Point pH controller has received offer for $220 - By Bro B/GXXXX.

4. Macro Orp Controller has received offer for 80 - by Bro AXXX - 9xxxx991

Thanks for the interests and time. Will be transacting soon once the last ph/orp controller has buyer. Hope no pilot. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Thanks bro tansk.

Update:

1. Pin Point pH monitor has received offer for $100 - By Bro LXXXXXX - 9xxxx249 - Thanks for the understanding

2. Reef Glove from RD - Sold. Thanks to the buyer who had to come down to sk to collect. : )

3. Pin Point pH controller - Sold. Thanks for meeting up and minimise my losses. : )

4. Macro Orp Controller has received offer for 80 - by Bro AXXX - 9xxxx991

Thanks for the interests and time. Will be transacting soon once the last ph/orp controller has buyer. Hope no pilot. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Update:

1. Pin Point pH monitor - Decided to keep for own consumption. Thanks to the bro who reserved for being understanding.

2. Reef Glove from RD - Sold. Thanks to the buyer who had to come down to sk to collect. : )

3. Pin Point pH controller - Sold. Thanks for meeting up and minimise my losses. : ) Sorry for the trouble. Hope the replacement is smooth. Anything, just give me a ring. Thanks.

4. Macro Orp Controller has received offer for 80 - Sold and thanks for coming down to collect.

5. ORP ###### pH controller - Reserved for Bro LXXXXX. Meeting later to transact.

Thanks for your attention.

Thanks for the interests and time. Will be transacting soon once the last ph/orp controller has buyer. Hope no pilot. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...