Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member
TY TY.

Tank full but not for long... fragging the zoas ... hehe....

Then will have lots of space.

Hey Peter,

Your orange zoas frag of 7 polyps grew to 20 already in <2 months!

Take close up shots for u tonight.

hi bro...

did u dose any extra stuff to get ur zoas to multiply so quickly?

My Decomissioned 2ft Cube: (31st March 2011)

Carpe Diem~!!!

My Current 4ft X 2ft X 2ft:

Link to comment
Share on other sites

hi bro...

did u dose any extra stuff to get ur zoas to multiply so quickly?

food: phytoplankton, zooplankton mainly.

add trace elements, iodine, strontium and molybenum regularly.

That's about it.

I think some zoas are quick multipliers while others are very slow.

My Armour of God has only 1 small baby polyp after 2 months. So happy to see it.

Will take pic when free.

Most of the other zoas are fuller and has grown about 10% at least.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

where did u get your reef booster?

You can get Reefbooster from Marine Life.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
food: phytoplankton, zooplankton mainly.

add trace elements, iodine, strontium and molybenum regularly.

That's about it.

I think some zoas are quick multipliers while others are very slow.

My Armour of God has only 1 small baby polyp after 2 months. So happy to see it.

Will take pic when free.

Most of the other zoas are fuller and has grown about 10% at least.

So when u going to get ur 12x12x12 frag tank??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

So when u going to get ur 12x12x12 frag tank??? :eyebrow:

wait for u lor.... wed?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
wait for u lor.... wed?

Should be ok, lunch time??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

okie dokie

Hey Jacky ... it's me, the newbie who read all (well .. almost all !) your thread. Man ! what can I say ..

NICE REALLY NICE especially when I have followed your setup since day 1. Where did u get your hands on

those RICs.

Tank specs : 2 x 1.5 x1.5

Link to comment
Share on other sites

  • SRC Member
okie dokie

Let me know what time u going down... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

so now i know who to look for when i want frags.. hahaha

bro, frag tank or no frag tank, anytime you want something I have thats frag-able, just pm me. :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Hey Jacky ... it's me, the newbie who read all (well .. almost all !) your thread. Man ! what can I say ..

NICE REALLY NICE especially when I have followed your setup since day 1. Where did u get your hands on

those RICs.

Hey dtan.

thank you very much for following my tank and the nice compliments.

My rics - hmmm - thanks to some of the reefers here.

Got them thru SRC buddies.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Here's the AOG zoas (The small frag on the plug).

See the baby on the left :) .

Soooooo happy....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Peter, your yuma.

Think I have posted it before but reposting it again... cannot find my own post.....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Space really tight now. Thinking of ways to manage real estate.

Once I have frag the zoas ; especially the bigger pieces, I should have some space for small frags.

Also toying with the idea of selling the cloves off so that I can build another rockwork extension on the left side.

Thinking.... thinking. .......

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

not bad the rics.. mine seems to be losing a little colour.. lol.. will continue to monitor..

mine faded the 1st 2 days too. Today seemed much better.

I dosed Kent Marine Chromaplex, iodine, Trace Elements twice recently and target fed them with mysis yesterday.

Also dosed phytoplankton and zooplankton and Seachem Reefplus.

does a little of everything (within reccommended amount).

Really hoping they colour up more....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

I have got a box of prodibio clean and reef booster.

Anyone has any advice/ feedback on the usage of these?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
mine faded the 1st 2 days too. Today seemed much better.

I dosed Kent Marine Chromaplex, iodine, Trace Elements twice recently and target fed them with mysis yesterday.

Also dosed phytoplankton and zooplankton and Seachem Reefplus.

does a little of everything (within reccommended amount).

Really hoping they colour up more....

Dun forget feeding some meaty foo helps as well.. î•

A man with a reef tank is a man with an empty wallet...

Link to comment
Share on other sites

  • SRC Member
I have got a box of prodibio clean and reef booster.

Anyone has any advice/ feedback on the usage of these?

You want feedback on Reef Booster and Bio Clean? Ok, I give u feedback on usage of these two and AZ NO3... :eyebrow:

IMG_0542.jpg

You see the pic above? This is what happened after I dosed Reef Booster and Bio Clean a couple of days ago and every morning, when I dose AZ NO3, my whole tank turns this cloudy. Before I dosed Reef Booster and Bio Clean, my tank only had slight cloudiness whenever I dosed AZ NO3 but this is SUPER cloudy now... :whistle Takes about 4 hours or more for my tank to clear up. :upsidedown:

As for my skimmer collection, it has increased tremendously. Used to be 1/5 cup for a week, right now, it is 3/4 cup within 3 days and it is Kopi O colour... :eyeblur:

When I dosed Reef Booster, my tank turned this cloudy also for 4 hours before it cleared up. Not sure if other people who used Reef Booster has experienced this before.

On RC, there are many threads concerning the use of Reef Booster and Bio Clean/Digest and the one common thing they mentioned is the Reef Booster is super concentrated. One of the reefers there mentioned that you should use Bio Clean/Digest for 6-8 weeks first before starting to use Reef Booster. The reason he gave was that you need to build up your bacteria count before using Reef Booster otherwise your nitrates would shoot up sky high.

Anyway, I found that probably 90% of the posts on RC regarding Reef Booster and Bio Clean/Digest were from reefers who keep SPS tanks.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

wah bro peter, how do you dose it? mine not cloudy after mixing the bio clean in the water i took out from my tank, i mixed it, then just pour it in my sump compartment with liverocks, no cloudyness encountered...

any bros able to input what they saw? lol

bioclean really works as my tank doesn't have new tank synd.. :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...