SRC Member TayHongSiang Posted March 22, 2010 SRC Member Share Posted March 22, 2010 you prob know this already but once you keep a dottyback, it will be hard for you to put in RG or other timid fishes already. That fella is a tyrant. yes...and they will challenge other fishes and intimidate less aggressive fishes...but once they know other fishes are not afraid...it will leave them alone... plus pt: very good at searching for brittleworms.... Quote Link to comment Share on other sites More sharing options...
jackywongto Posted March 22, 2010 Author Share Posted March 22, 2010 plus pt: very good at searching for brittleworms.... Did not know they go for bristleworms..... nice Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
Terryz_ Posted March 22, 2010 Share Posted March 22, 2010 Did not know they go for bristleworms..... nice Not all... Only some I think.... Quote Member of: Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 22, 2010 SRC Member Share Posted March 22, 2010 Did not know they go for bristleworms..... nice yup...saw mine chewing on them a few times when i first got it.... Quote Link to comment Share on other sites More sharing options...
jackywongto Posted March 22, 2010 Author Share Posted March 22, 2010 Finally managed to complete my rescape. hehe.... very very satisfied. the only thing is that I did not use epoxy to secure most of the small frags. Do not think they will stay in place ..... still need to move them back from time to time. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 22, 2010 SRC Member Share Posted March 22, 2010 Finally managed to complete my rescape.hehe.... very very satisfied. the only thing is that I did not use epoxy to secure most of the small frags. Do not think they will stay in place ..... still need to move them back from time to time. can use silicon gel to stick corals onto the rocks in the tank? Quote Link to comment Share on other sites More sharing options...
SRC Member poomoon Posted March 22, 2010 SRC Member Share Posted March 22, 2010 His tank is pretty covered one,... so dun think jumping is the issue.Prob kena harassed by the more established tankmates ok, my purple always in her cave, when lights go off starts to wonder around, but so far seems happy and not even going up the surface, hope doesn't jump-off as my tank is wide open ... well, not really i guess coz the maxspect is sitting right on top of it Quote 25 Gal Micro Ocean Link to comment Share on other sites More sharing options...
SRC Member poomoon Posted March 22, 2010 SRC Member Share Posted March 22, 2010 Hey Jun, BTW, I have gone back to my reefpack. I wanna make that set up work! *fist clenched that's good bro ! yeah i saw ytou selling out your canister. i'm still with my reefpack. only thing before is couldn't solve the microbubbles from the skimmer even with wool at bottom, so tried relocating everything. eventually ended up both skim/filter together as advertized. microbubbles gone. also good as it allowed me to place the ice probe that i've mounted in an HOB filter. just haven't gone full throttle on it yet as the waterfall causes too much bubbles, so trying to have the water fall directed instead probably with a pipe or something to flow down better. yeah i know i know i haven't posted yet ... soon bro. my tank is empty ... i don't have jewels and emeralds like you guys yet. soon ... soon ... Quote 25 Gal Micro Ocean Link to comment Share on other sites More sharing options...
jackywongto Posted March 22, 2010 Author Share Posted March 22, 2010 can use silicon gel to stick corals onto the rocks in the tank? ... sounds scary..... I can leave will the zoas toppling Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 22, 2010 Author Share Posted March 22, 2010 that's good bro ! yeah i saw ytou selling out your canister. i'm still with my reefpack. only thing before is couldn't solve the microbubbles from the skimmer even with wool at bottom, so tried relocating everything. eventually ended up both skim/filter together as advertized. microbubbles gone. also good as it allowed me to place the ice probe that i've mounted in an HOB filter. just haven't gone full throttle on it yet as the waterfall causes too much bubbles, so trying to have the water fall directed instead probably with a pipe or something to flow down better. yeah i know i know i haven't posted yet ... soon bro. my tank is empty ... i don't have jewels and emeralds like you guys yet. soon ... soon ... My bubbles issue is gone. not sure why it took so long. Prob with the way I tune it. I always shut the valve. Then slowly loosen it until the bubbling is at the neck. there will be a point where you will hear an exceptionally loud hissing sound. just loosen it by a tiny weeny bit more and that should be the sweet spot. Waiting for your update bro! Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 22, 2010 Author Share Posted March 22, 2010 I extended the front part with 2 more mini arcs to place frags and for fishes to swim through. the silly yellow clown has taken the gonio has her permanent resting spot.... darn Side view: See the H goby at the bottom. thats her lair there. THe black grid at the back ==> chaeto project. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member tian1974 Posted March 22, 2010 SRC Member Share Posted March 22, 2010 I extended the front part with 2 more mini arcs to place frags and for fishes to swim through.the silly yellow clown has taken the gonio has her permanent resting spot.... darn Side view: See the H goby at the bottom. thats her lair there. THe black grid at the back ==> chaeto project. nice slope scape from side and front view. is that my monti rock at the front corner? Quote God Blessed all who appreciate His wonderful and beautiful creations. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ my first reef aquarium 15jan2010 3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs and other misc... Link to comment Share on other sites More sharing options...
jackywongto Posted March 22, 2010 Author Share Posted March 22, 2010 nice slope scape from side and front view. is that my monti rock at the front corner? thanks Justin. wanted to scape a bonsai but in a 1.5 ft cube.... really not quite possible. Scaping a nano is really difficult. yah... eyes so sharp. Thairun only has one left. The other superman monti was taken up already. But bad news, I accidentally broke it into 2 during my scape... hmmmm the good thing now is that you have 2 piece paiseh..... Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 22, 2010 Author Share Posted March 22, 2010 Impt update for those using prodibio pdts: Pls do not assume that the vial will always make a clean break. I step onto remnants of the broken vial today. I think i did not make a clean break and a piece of glass shattered out. thank goodness my girls did not step on it. So please take special precaution. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member tian1974 Posted March 22, 2010 SRC Member Share Posted March 22, 2010 thanks Justin. wanted to scape a bonsai but in a 1.5 ft cube.... really not quite possible.Scaping a nano is really difficult. yah... eyes so sharp. Thairun only has one left. The other superman monti was taken up already. But bad news, I accidentally broke it into 2 during my scape... hmmmm the good thing now is that you have 2 piece paiseh..... yeah, scaping a nano sounds difficult. but u did well and thanks for breaking the monti into 2 pieces so i can put 2 different places to see them grow hehezz.. Quote God Blessed all who appreciate His wonderful and beautiful creations. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ my first reef aquarium 15jan2010 3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs and other misc... Link to comment Share on other sites More sharing options...
SRC Member peacemaker Posted March 22, 2010 SRC Member Share Posted March 22, 2010 wanted to scape a bonsai but in a 1.5 ft cube.... really not quite possible.Scaping a nano is really difficult. Its only possible if you start from scratch and have the discipline to buy only minimal pieces of live rocks. I wanted to do a bonsai scape, but couldn't bear to part with the rocks, and thus, rock pile... I find scaping for nano cube tanks difficult. If its longish, it should be easier. Quote Link to comment Share on other sites More sharing options...
SRC Member onizukaa Posted March 22, 2010 SRC Member Share Posted March 22, 2010 wow coral rx gangs.. i got one zoas.. infested with one green slime algae. mins after putting in the magical solution, off it came.. LOL just need to use stick to pull off the whole piece of algae.. again another for coral rx HAHAHAHA Quote Link to comment Share on other sites More sharing options...
SRC Member tian1974 Posted March 22, 2010 SRC Member Share Posted March 22, 2010 anyone got half oz or 1 oz to sell? i need it! Quote God Blessed all who appreciate His wonderful and beautiful creations. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ my first reef aquarium 15jan2010 3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs and other misc... Link to comment Share on other sites More sharing options...
SRC Member onizukaa Posted March 22, 2010 SRC Member Share Posted March 22, 2010 pic says a thousand words.. sorry TS, OT your thread again haha.. but your thread is like a TCSS + coral rx thread Quote Link to comment Share on other sites More sharing options...
SRC Member onizukaa Posted March 22, 2010 SRC Member Share Posted March 22, 2010 anyone got half oz or 1 oz to sell? i need it! justin, peter taking order from 1 oz @ $30. pm him for details Quote Link to comment Share on other sites More sharing options...
SRC Member tian1974 Posted March 22, 2010 SRC Member Share Posted March 22, 2010 justin, peter taking order from 1 oz @ $30. pm him for details right away, thanks man Quote God Blessed all who appreciate His wonderful and beautiful creations. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ my first reef aquarium 15jan2010 3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs and other misc... Link to comment Share on other sites More sharing options...
jackywongto Posted March 23, 2010 Author Share Posted March 23, 2010 Its only possible if you start from scratch and have the discipline to buy only minimal pieces of live rocks. I wanted to do a bonsai scape, but couldn't bear to part with the rocks, and thus, rock pile... I find scaping for nano cube tanks difficult. If its longish, it should be easier. yah , the other thing with bonsai scape is that you can only keep minimal LS. really minimal....... Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 23, 2010 Author Share Posted March 23, 2010 wow coral rx gangs.. i got one zoas.. infested with one green slime algae. mins after putting in the magical solution, off it came.. LOL just need to use stick to pull off the whole piece of algae.. again another for coral rx HAHAHAHA Oniz is a CoralRX fervent believer now Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 23, 2010 Author Share Posted March 23, 2010 anyone got half oz or 1 oz to sell? i need it! Saw that you placed order with Peter on the other forum already. but if you need some urgently , i can pass you some to tie you over 1st this friday. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member poomoon Posted March 23, 2010 SRC Member Share Posted March 23, 2010 yah , the other thing with bonsai scape is that you can only keep minimal LS.really minimal....... but would really be nice ... well i guess that's the concept for japanese, minimal and simple. maybe can still put up a pico tank ... hmm ... think think think .... Quote 25 Gal Micro Ocean Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.