Jump to content

V_C's tank "3rd generation"


Recommended Posts

  • SRC Member

Well guys, went missing for a went missing for a while and guess the break is over... :eyebrow:

Missing the fun of having corals fully open and having lots of skimmate that's what i missed when i took a break from reefing... :heh:

For now its still the RSM (ps if some of you tot i've upgraded)

Current tank:

post-14611-1267691207_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

  • SRC Member

Dream tank... (sorry to use bro Jacky's photo but its really an inspiration to me) :eyebrow:

post-14611-1267691449_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

lol paiseh...... thanks for the compliments bro V.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
lol paiseh...... thanks for the compliments bro V.

I'm still a long way to creating that tank that looks like urs... :upsidedown:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
Not far Mr V.

All you need is patience, save lots of money and buy the right stuff (:

Welcome back!

Happy Reefing,

Marc J.

Thanks bros, buying the right stuffs... Hmmm, getting ready to buy some supplements eg, marine health and iodide to spice up the colour of my corals :rolleyes:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

Well, just performed a sand bed cleaning and its cleaner, free of diatoms... :rolleyes:

Dusty water are floating particles from sand bed cleaning, like kena earthquake like tt... :pinch: Sorry for messy tank quite empty now... Want to look for gems but no time... Haiz -_-

post-14611-1268728514_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

And btw, i clean my sand bed by scooping up sand and cleansing it with water... Will this method cause any harm to my tank? :huh:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • Senior Reefer

why do you clean the sand bed? leave it to mature..... sand actually houses tons of beneficial bacteria and is sort of like liverock. by removing it and cleaning, you're killing all this. its like soaking liverock in water and re-introducing back into to your tank.

if you want to remove diatom build up on the sand, a simple stirring on the surface is enough. or get some sandsifters to stir it once inawhile.. i never hear people removing sand to wash before...

Link to comment
Share on other sites

  • SRC Member
why do you clean the sand bed? leave it to mature..... sand actually houses tons of beneficial bacteria and is sort of like liverock. by removing it and cleaning, you're killing all this. its like soaking liverock in water and re-introducing back into to your tank.

if you want to remove diatom build up on the sand, a simple stirring on the surface is enough. or get some sandsifters to stir it once inawhile.. i never hear people removing sand to wash before...

Oops... Stirring on the surface of the sand is it? The sandsifter I got isn't hardworking one leh... :)

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • Senior Reefer
Oops... Stirring on the surface of the sand is it? The sandsifter I got isn't hardworking one leh... :)

i use my hand to stir up the surface lightly. to lightly churn the diatoms. i dont have any sandsifters except 1 sand dollar. but i think its quite useless.

Link to comment
Share on other sites

  • SRC Member

Well at GO now... Lotsa gems... Lost for words to describe... Bought some fire and ice zoas and some bubbles and green rics... Now how am I suppose to go back home... :lol:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • 2 months later...
  • SRC Member

The first ric I've ever acquired in the history of my whole hobby... Very precious one... :yahoo:

post-14611-1275551190745_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

MIA for long time...and now u show up with this ric...not bad...

from irwarna? or CF?

GO... Yea MIA long time... Now jus wanna clean up my tank...

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

And BAD news guys... Tank leaking... Drop by drop of water is leaking slowly but surely... Looking for silicon o glue things up... Meanwhile my 'government' is giving me warning to rectify things before she'll decom' my tank... :(

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Have you ID-ed the source of the leak? If it is from the tank sides or wall, then you have a problem. If the leak is from a joint, you can still empty it out and re-silicone it.

My 1.5ft nano cube

My 24G nano tank (Decommed)

I can picture in my mind a world without war, a world without hate.

And I can picture us attacking that world, because they'd never expect it.

-- Jack Handey

Link to comment
Share on other sites

  • SRC Member

Have you ID-ed the source of the leak? If it is from the tank sides or wall, then you have a problem. If the leak is from a joint, you can still empty it out and re-silicone it.

Well, got some detective work to do when I get back home... And will epoxy do the job?

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Don't think so, to the best of my understanding epoxy is rigid and can be brittle under stress... silicone is flexible and less likely to crack or give way under pressure.

If the leak is from a cracked glass, then cannot be helped liao. BTW, if your tank acrylic or glass? I heard of a lot of RSM tanks local and overseas cracking open after some time.

My 1.5ft nano cube

My 24G nano tank (Decommed)

I can picture in my mind a world without war, a world without hate.

And I can picture us attacking that world, because they'd never expect it.

-- Jack Handey

Link to comment
Share on other sites

  • SRC Member

Don't think so, to the best of my understanding epoxy is rigid and can be brittle under stress... silicone is flexible and less likely to crack or give way under pressure.

If the leak is from a cracked glass, then cannot be helped liao. BTW, if your tank acrylic or glass? I heard of a lot of RSM tanks local and overseas cracking open after some time.

Huh! So Jia lat?? It's glass and if tt thing cracks open my mom is so gonna decom' it... :(

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Done up the leak alittle... Still

leaking but lessened.. :(

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Bro you mean the crack is on the glass wall itself???

No, it seemed tt its actually the original silicon that has worn... Hence causing water from the built in sump to leak out... Its actually the part at the plugs.. -_-

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      真诚制作约克大学文凭毕业证Q微707091118办理York学历认证毕业证成绩单,专业办理教育部官网学历认证,国外留服认证 York University

    2. 0

      真诚制作高贵林学院文凭毕业证Q微707091118办理CC学历认证毕业证成绩单,专业办理教育部官网学历认证,国外留服认证CoQuitlam College

    3. 0

      真诚制作不列颠哥伦比亚理工学院文凭Q微707091118制作BCIT学历认证毕业证成绩单,专业办理教育部官网学历认证,国外留服认证British Columbia Institute of Technology

×
×
  • Create New...