SRC Member triggerfish Posted April 7, 2010 SRC Member Share Posted April 7, 2010 Chanced upon this Controller at Sim Lim, priced at $55. Quote Link to comment Share on other sites More sharing options...
SRC Member triggerfish Posted April 7, 2010 Author SRC Member Share Posted April 7, 2010 intend to use it as an external temp controller, hence, the connection goes like this: (1) for further ease of use, will buy a regular wall-plug so as to allow a regular 3-pin plug (from the chiller) to be connected to this controller straightaway (2) notice there are 12 'holes' at the back of the controller, and as stated on the manual, (1) and (2) is for the sensor (3) (3) 'LIVE' to the OUTPUT (which is my wall-plug now) (4) (4) 'LIVE' from my main power, which is connected in parallel to (12) too (5) (11) is is 'NEUTRAL' which is drawn from the main power, which is also connected to the wall-plug. okie, did i get these right? pls advise. Quote Link to comment Share on other sites More sharing options...
SRC Member teebs Posted April 8, 2010 SRC Member Share Posted April 8, 2010 intend to use it as an external temp controller, hence, the connection goes like this: (1) for further ease of use, will buy a regular wall-plug so as to allow a regular 3-pin plug (from the chiller) to be connected to this controller straightaway (2) notice there are 12 'holes' at the back of the controller, and as stated on the manual, (1) and (2) is for the sensor (3) (3) 'LIVE' to the OUTPUT (which is my wall-plug now) (4) (4) 'LIVE' from my main power, which is connected in parallel to (12) too (5) (11) is is 'NEUTRAL' which is drawn from the main power, which is also connected to the wall-plug. okie, did i get these right? pls advise. Not sure if I read it correctly but the temp controller does not have a power cord? Quote My Setup: 3x2x2 tank with IOS Equipment List: Chiller: Artica 1/5HP Chiller Pump: Sicce 4000 Return Pump: OR3500 Skimmer: Deltec APF600 Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker Lights: DElighting 2x150W MH + 2x 39W T5 Atinic FR: Skimz FR Pump: Atman AT-104 Tubby ATO, Kalkweisser Reactor with magnetic stirrer. Link to comment Share on other sites More sharing options...
stevenkoh08 Posted April 8, 2010 Share Posted April 8, 2010 intend to use it as an external temp controller, hence, the connection goes like this: (1) for further ease of use, will buy a regular wall-plug so as to allow a regular 3-pin plug (from the chiller) to be connected to this controller straightaway (2) notice there are 12 'holes' at the back of the controller, and as stated on the manual, (1) and (2) is for the sensor (3) (3) 'LIVE' to the OUTPUT (which is my wall-plug now) (4) (4) 'LIVE' from my main power, which is connected in parallel to (12) too (5) (11) is is 'NEUTRAL' which is drawn from the main power, which is also connected to the wall-plug. okie, did i get these right? pls advise. bro have went though ur write up what u done is correct so just do it if u need help to hook it up call me i'll go over to ur place and help u and bro peter the power cord is already drawn there on pin 11 & 12 1 Quote Link to comment Share on other sites More sharing options...
yooyoo99 Posted April 8, 2010 Share Posted April 8, 2010 Does it come with the temp sensor probe? Quote Link to comment Share on other sites More sharing options...
SRC Member triggerfish Posted April 8, 2010 Author SRC Member Share Posted April 8, 2010 yes it does come with the sensor, and spare sensor is selling at $15 / piece. Quote Link to comment Share on other sites More sharing options...
SRC Member triggerfish Posted April 8, 2010 Author SRC Member Share Posted April 8, 2010 appreciate it bro! bro have went though ur write up what u done is correct so just do it if u need help to hook it up call me i'll go over to ur place and help u and bro peter the power cord is already drawn there on pin 11 & 12 Quote Link to comment Share on other sites More sharing options...
stevenkoh08 Posted April 8, 2010 Share Posted April 8, 2010 u're welcome u're a good help to me also for so many things ha ha Quote Link to comment Share on other sites More sharing options...
yooyoo99 Posted April 9, 2010 Share Posted April 9, 2010 Thanks for the info on this thread. If your unit is hooked up and working, pls update. I may want to do the same thing. Outside units are ex, $200 per controller.... Quote Link to comment Share on other sites More sharing options...
moss_guy Posted April 30, 2010 Share Posted April 30, 2010 That is great save me some money. Thank you for sharing. Quote Link to comment Share on other sites More sharing options...
sherman Posted May 3, 2010 Share Posted May 3, 2010 Sure to work I had being using it for 4 years. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted May 8, 2010 SRC Member Share Posted May 8, 2010 Hi bro.... I'm using it..... The entire controller plus sensor only sell at SGD65.... Thanks. Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member LaW Posted May 8, 2010 SRC Member Share Posted May 8, 2010 it works +1 Quote If a man could beat his own fantasy. Then to only breed in captivity. Then its pointless. Genesis 1:20 And God said, Let the waters bring forth abundantly the moving creature that has life, and fowl that may fly above the earth in the open firmament of heaven. And God created great whales, and every living creature that moves, which the waters brought forth abundantly, after their kind, and every winged fowl after his kind: and God saw that it was good. And God blessed them, saying, Be fruitful, and multiply, and fill the waters in the seas, and let fowl multiply in the earth. And the evening and the morning were the fifth day. || Tank: 78" x 30" x 30" || Sump: 48" x 22" x 20" || Lights: PowerModule 10 X 80W|| Returns: 2 x HF32 || || Skimmer: BubbleKing Supermarin 300 || Wavemaker: 3 x 6100 & 1 x 6200, 2 x Wavebox 6212, WavySea || || FR: 2 x FR150 || NR: Sulphur Denitrator || CR: RM Custom Made 8" || KR: Deltec KM500 || TopUp: Tunze Osmolator 3155 || || UV: Coralife 12X 36W || Ozonizer: Sanders C200|| Controller: GHL Profilux Plus II Ex || Link to comment Share on other sites More sharing options...
ogykogy Posted May 9, 2010 Share Posted May 9, 2010 which shop u got it from.?very intrested in this and very good deal.can pm me the name of the shop?thanks! Quote 2 FEET CUBE REEF DISCO(60cmx60cmx60cm) TOTAL 286 LITERS WITH SUMP LIGHTS:PHAROS LED 90 WATTS WITH WIRELESS CONTROLLER RETURN PUMP:EHEIM 1260CHILLER:HAILEA 150A + EHEIM COMPACT 1000 WITH EXT TEMP CONTROLLERWAVEMAKER:JEBAO WP25REACTOR:TLF PHOSBAN REACTOR 150 WITH EHEIM 600(ROWAPHOS)SKIMMER:H&H S150 WITH AQUABEE 2000/1 MEDIA:BACTERIA KING GLASS CLEANER:ALGAE FREE PIRANHA FLOAT WITH EASY BLADE ATO:TUNZE NANO OSMOLATOR 3152 RO/DI PURIFIER:ZeRO EX5 - RO/DI ULTRA 200 WITH HM DIGITAL DM-1 IN-LINE DUAL TDS METER Link to comment Share on other sites More sharing options...
amphipod Posted May 9, 2010 Share Posted May 9, 2010 Yes, pls pm shop name & location as well. Thks in advance. Quote Link to comment Share on other sites More sharing options...
SRC Member jyoon Posted May 9, 2010 SRC Member Share Posted May 9, 2010 Hi All Fox controller can be purchased in Sim Lim Tower basement shop. Go in from the main entrance and turn left 1st shop. Hope this help. Quote Link to comment Share on other sites More sharing options...
RockyBoy Posted June 8, 2010 Share Posted June 8, 2010 For those using MH lightings, use this to automatically swithc off your MH lights when the temperature reaches unsafe limit. It would be a cheap DIY but will save you the hardship when your chiller breakdown while your MH lights are switch on... Quote Member of : UEN: T08SS0098FMASS in Facebook Reefing in LED Link to comment Share on other sites More sharing options...
SRC Member MOssrope Posted June 8, 2010 SRC Member Share Posted June 8, 2010 In regards to the wiring schematics in post #2.. hope someone can offer me some assistance in some wiring. Chiller model Resun CL450. this is the wire for the power to the Chiller's original controller. One blue, Two red, One black wire. I need to totally overwrite the original controller as the button is jammed on the set temperature mode, putting the chiller in standby mode i think. how should i go about wiring this to a external controller with the given schematics in post#2 thanks in advanced, sorry for being a wire idiot. Quote Brown SPS > Kinder Surprise White SPS = Kinder Surprise after expiry date Assumption killed the dinosaurs, they didnt have test kits. Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted June 29, 2010 SRC Member Share Posted June 29, 2010 In regards to the wiring schematics in post #2.. hope someone can offer me some assistance in some wiring. Chiller model Resun CL450. this is the wire for the power to the Chiller's original controller. One blue, Two red, One black wire. I need to totally overwrite the original controller as the button is jammed on the set temperature mode, putting the chiller in standby mode i think. how should i go about wiring this to a external controller with the given schematics in post#2 thanks in advanced, sorry for being a wire idiot. Hi bro.... That is the power wire for the chiller..... You may need to double confirm on the connection.... Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member tropic Posted October 8, 2010 SRC Member Share Posted October 8, 2010 can this controller be fixed onto a hailea chiller? plan to install one on chiller and the other on my mh..any one?thanks. Quote Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted October 8, 2010 SRC Member Share Posted October 8, 2010 can this controller be fixed onto a hailea chiller? plan to install one on chiller and the other on my mh..any one?thanks. Hi bro... Yes it can.... Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member tropic Posted October 8, 2010 SRC Member Share Posted October 8, 2010 Hi bro... Yes it can.... thanks.you have an actual picture with the housing? so i will need a housing to hold the thermostat and a 3pin socket outlet(for connecting chiller) attached to the housing of some sort right.....and the chiller will remain off until thermostat activate it ...? Quote Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted October 8, 2010 SRC Member Share Posted October 8, 2010 thanks.you have an actual picture with the housing? so i will need a housing to hold the thermostat and a 3pin socket outlet(for connecting chiller) attached to the housing of some sort right.....and the chiller will remain off until thermostat activate it ...? Hi bro... Yes... With housing will make the complete DIY looks nicer..... If you don't mind the appearance, you can just tape it to ensure no exposure to the AC which could result in serious injuries.... Do take note on this.... Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member tropic Posted October 9, 2010 SRC Member Share Posted October 9, 2010 i see some required relay?? Quote Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted October 9, 2010 SRC Member Share Posted October 9, 2010 i see some required relay?? Hi bro.... The relay would depend what will be the overall power...cause there is a limitation on the internal relay.... Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.