Jump to content

Custom make 2 ft SPS new setup


mousecat11
 Share

Recommended Posts

  • SRC Member

Hi Guys,

Just decomm my 4ft LPS tank , and decided to tried out a smaller 2ft tank instead this time round.. partly due to the upkeep and electricity cost of runing a 4ft tank..

saw all the nice nice SPS setup from the fellow memeber in the tank thread here, so wanna make one full SPS small tank this time round..

Will be posting update of my tank, and please feel free to share your though on my new setup.. need any the helps and advice i can get from you guys ! :thanks:

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • Replies 139
  • Created
  • Last Reply

Top Posters In This Topic

  • SRC Supporter

Oh..will be following your thread.. :)

My little ocean
Mix Reef-Main tank 30 inches Length x 32 inches Width x 18 inches Height
2 X Skim DC return pump
Aquabee 2000 chiller feeder

Hailea 1/2 Chiller
1 X Tunze nano wavebox

2 X EcoTech Marine Vortech MP10W
Deltec skimmer - Internal
Lumenarc 400watt 12K Reeflux

8 X T5 ATI Powermodule
Prolifux control with external touchscreen display
Refugium keeping chaeto

Link to comment
Share on other sites

  • SRC Member

Just collected the custom make tank from Vincent last night togther with the custom make sump...

the main tank is runing on a external overflow instead of a internal overflow.. as i do not want to cut a hole in my cabinet..

any advantage or draw back for tank runing on a external overflow instead of a internal overflow system ?

post-396-1231477949.jpg

post-396-1231477960.jpg

post-396-1231477970.jpg

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member
Oh..will be following your thread.. :)

wow you are here ? when are you posting your setup here too ? haha.. :eyebrow:

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Supporter
wow you are here ? when are you posting your setup here too ? haha.. :eyebrow:

Lazy to post le..whats your tank height? Looks like more then 2ft height.

My little ocean
Mix Reef-Main tank 30 inches Length x 32 inches Width x 18 inches Height
2 X Skim DC return pump
Aquabee 2000 chiller feeder

Hailea 1/2 Chiller
1 X Tunze nano wavebox

2 X EcoTech Marine Vortech MP10W
Deltec skimmer - Internal
Lumenarc 400watt 12K Reeflux

8 X T5 ATI Powermodule
Prolifux control with external touchscreen display
Refugium keeping chaeto

Link to comment
Share on other sites

  • SRC Member

First set of equipment bought brand new.. Tunze nano box , didnt really try this before but heard it work well ?

post-396-1231478092.jpg

post-396-1231478115.jpg

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

nice tank.. :)

my tank also go by external overflow..

advantage of external overflow = more space inside tank for gems.. :lol:

disadvantage maybe have to watch out for leaks..

nice setup, will be watching this one.. :eyebrow:

Link to comment
Share on other sites

First set of equipment bought brand new.. Tunze nano box , didnt really try this before but heard it work well ?

Hi..can you PM me the price for the Nano Box. Thanks.

Display 3ft x 1.5ft x 2ft Custom Tank with 52 kg of Live Rock.

Sump 2ft x 1ft x 1.5ft Custom Tank with 5kg of Live Rock,6kg of Bio Home and Chaeto.

2 x 39w T5 HO Aquaz True Actinic.

2 x 39w T5 HO Aquaz Blue Plus.

1 x Resun 650 Chiller.

1 x Weipro 2012 Protein Skimmer.

1 x DIY Fluidize Reactor with Rowaphos.

2 x Hailea 5000L/hr Return Pump.

1 x SunSun Flow Pump.

2 x Seio 820 Flow Pump.

Link to comment
Share on other sites

  • SRC Member
Hi..can you PM me the price for the Nano Box. Thanks.

Bought the Nano wavebox from ML.. they are selling 400+++

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member
nice tank.. :)

my tank also go by external overflow..

advantage of external overflow = more space inside tank for gems.. :lol:

disadvantage maybe have to watch out for leaks..

nice setup, will be watching this one.. :eyebrow:

Thanks bro... hear that having a external overflow will have some problem with the micro bubble as well... anyone has this experience before ?? How can i prevent this ??

The guy is coming to do up my piping next week, so i hope i can start runing the water next week.. can wait to get it started.. haha :eyebrow:

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

Intented to set up a energy saving tank to cut cost for long run.. so the considersation of all the equipment purschase has been on the power consumption and the quality as well.. or we can say .. VALUE FOR MONEY.. haha..

My tank specification is as follow;

1) 5 mm glass with external overflow tank

2) 5 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000 ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

TOTAL ; 236 W !!!

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member
Wouldn't it be better to get a Vortech MP20 instead? Should take up less space inside the tank. :erm:

was deciding between the tunze and vortech , but there is some feedback that the shaft of the impeller may rust over some time.. and it does not have the light controller which the tunze does as well.... so decided to try this out..

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

my chiller finally arrive !

post-396-1231562522.jpg

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

RM CR and NR ..

CR is fill with ROWA media and grotech mg pro..

post-396-1231562678.jpg

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

LumeanAqua LED from ML !!! nice packaging inside .. :eyebrow:

post-396-1231562989.jpg

post-396-1231563000.jpg

post-396-1231563010.jpg

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

color temperature chart for setting different color temperature.. cant wait to start testing this lighting out once my piping is done up next week..

post-396-1231563059.jpg

post-396-1231563099.jpg

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member
Lazy to post le..whats your tank height? Looks like more then 2ft height.

ya bro,, it is a 2ft height.. a good height to see the whole tank if you stand just right in front.. :eyebrow::eyebrow:

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

was deciding between the tunze and vortech , but there is some feedback that the shaft of the impeller may rust over some time.. and it does not have the light controller which the tunze does as well.... so decided to try this out..

I tot vortech have changed their impeller to ceramic or plastic material liao?

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites

  • SRC Member
MH lighting will be nicer for SPS set-up as you get the shimmering effect which LEDs cannot give.

Just my opinion.

Can't wait to see yr tank running.

If you see the display tank in ML, the Lumenaqua produces very nice Shimmering effect exactly just like what MH can produce or better !! But without all the heat being transfer into the water of course .... that is one of the main reason why i decided on this..

Also due to this lighting, i need not get a overpower chiller which help save some cost as well.. :eyebrow::eyebrow:

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...