jetski250 Posted July 10, 2010 Share Posted July 10, 2010 Hi all, At planning stage of my new 250G SPS tank. 200 x 70 x 70 cm. Target commissioning in mid Aug so have time now to tweak and enhance design. Sincerely welcome your suggestions as SPS experience only 8 months. Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
jetski250 Posted July 10, 2010 Author Share Posted July 10, 2010 Attached Tank eqt design and Lighting Plan Main feature: 1 15mm thick grade1 glass tank 200cm X 70 X 70ht construct with Wacker Elastosil 121 silicone (Germany) Front viewing panel crystal. Oyama black backing paper, external overflow system complete with water change valve with 3 years leakage warranty 2 Solid wood structural (10 years warranty) support complete with carpentry work in laminate finish. 266 cm by 77 cm by 260 ht ( appr. 9ft) This includes openable hood, cabinet doors and full height cabinet. BLUM soft closing hinges and high quality laminate finish Filtration system : 3 10mm thick 5 x 2 Sump tank with compartments preparation for complete marine filtration bio-system complete with PVC white holder(USA), filterfloss, AquaPharm PUR II activated carbon (USA) ,bio-ball, black sponge support for protein skimmer,splash proof cover. Auto top up system : tank, devise and eheim pump Equipment : 4 Aquabee up7000(Germany) as return pump 5 4 x 250w MH Lumenbright (USA) reflector with reeflux 12kk bulb and dimmable ballast 19.5" complete with 2 x 80W ATI (Germany) blue plus total 1160w 6 Tunze 6105 x 4 + 7095 7 Reefcool 1.5HP with Titanium Coil and Digital Controller Supplement: 8 Marine Environment salt (USA) Livestock: 9 Cured live rock 150 kg (estimated) and scaping with AquaPharm Rockbonder (UK) 10 Natures Ocean (USA) Aragonite LIVE sand (USA) 15 bags - 3cm Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
cedricang Posted July 10, 2010 Share Posted July 10, 2010 Welcome to the sps reefing family Have got just two ideas for your consideration. Lightings - See that your lightings are quite aggressive with 4 MHs. Nothing wrong but just try to cater for a design which you can switch between MH and T5s just in case you decided to give T5 a try. Btw, you might wanna consider placing the blowing fan at the level in between the MH and the water level, this will ensure the heat generated by MH is directly blown towards the exhaust fan = better heat extration. Sump - Try to cater a refugium section, in case you wanna keep some macro algea for nutrient export. There will be advantage with some critters like pods and so on to thrive there which is good for your corals including sps. I find bro Lemon Lemon's sum tank is quite cool, check out his design Happy planning ! Quote Treat others the way you wanna be treated... Link to comment Share on other sites More sharing options...
Senior Reefer yikai Posted July 10, 2010 Senior Reefer Share Posted July 10, 2010 Welcome to the sps reefing family Have got just two ideas for your consideration. Lightings - See that your lightings are quite aggressive with 4 MHs. Nothing wrong but just try to cater for a design which you can switch between MH and T5s just in case you decided to give T5 a try. Btw, you might wanna consider placing the blowing fan at the level in between the MH and the water level, this will ensure the heat generated by MH is directly blown towards the exhaust fan = better heat extration. Sump - Try to cater a refugium section, in case you wanna keep some macro algea for nutrient export. There will be advantage with some critters like pods and so on to thrive there which is good for your corals including sps. I find bro Lemon Lemon's sum tank is quite cool, check out his design Happy planning ! lol thanks for remembering my sump. just a reminder, if anyone intends to to my sump's cabinet design, please ensure you oil the hinges on the flip top roof otherwise it will rust and become very hard to open. hard to open = no access to sump. Quote Link to comment Share on other sites More sharing options...
jetski250 Posted July 10, 2010 Author Share Posted July 10, 2010 Yes, saw Lemon's sump tank and like the idea of "tank inside a tank". Will try to incorporate in case I need to ever incarcerate a naughty fish. (though catching it first might be an issue....) One design idea I have for sump is to have the return pump compartment as huge as possible(80-100l). Planning to plumb a valve-controlled pipe from overflow all the way to drainage behind the tank. When doing water change, I can simply open this pipe and water would be pumped out by main return. As you can imagine, the water level in the return pump compartment would fall as I do this so need to keep it big. Half of water change job done. Good idea about placement of fan between MH and water. Will add one more fan there while keeping the higher fan as well. Welcome suggestions about the lighting configuration...and everything else. Thanks Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
SRC Member peacemaker Posted July 10, 2010 SRC Member Share Posted July 10, 2010 Wow... looks like a massive project in the works! You might wanna consider replacing the bio balls with Bio-homme instead. To top off what Lemon suggested, you can try using Vaseline on most metal parts. Works pretty well. Quote Link to comment Share on other sites More sharing options...
jetski250 Posted July 10, 2010 Author Share Posted July 10, 2010 Vaseline - checked. BTW, can anyone teach me how to insert image into the post itself instead of attaching as thumbnail? Appreciated. Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
jetski250 Posted July 19, 2010 Author Share Posted July 19, 2010 Some updates on plans: - increasing width from 70 to 80cm and 2 cm of height. So now it is a 288G with dimensions of 200 x 80 x 72cm - Supplementing 2 more T5 lights - Changing the top cabinet design to align with bottom compartment lines. Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
jetski250 Posted January 5, 2011 Author Share Posted January 5, 2011 Finally moved from paper to reality...have taken a bit longer than originally thought but like they say - only bad things happen quickly in this hobby. A few photos to show how the tank looks. Tank is located in Dining Area View from front Cabinet doors open Aquascaping Sump View from sofa Going to start adding live stock soon. Cycled for more than 2 months now. Pretty excited and welcome suggestions of where to go for fish shopping. New in this hobby in Singapore and have only been to one fish shop so far. (suaku right?) Also please help me recommend interesting live stock. Thanks. Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
wilsontantw Posted January 5, 2011 Share Posted January 5, 2011 neat stuff! good to have such a clean looking tank (and cabinet too)... everything is hidden neatly! btw: is dosing pump still part of the plan? just curious, are you staying ard the east/west or it's complicated? Quote decommissioned 2.5x2x2 Videos: | | Your mind is like a parachute. It only works when it is open. Link to comment Share on other sites More sharing options...
Gouldian Posted January 6, 2011 Share Posted January 6, 2011 Congrats for turning vision to reality! Applause for the patience shown in cycling the tank for 2 months without itching on adding livestocks! I am sure you will be rewarded with a more stable system with all biological aspects given sufficient time to reach equilibrium. Thanks for sharing. Quote "Reefs, like forests, will only be protected in long term if they are appreciated" Dr. J.E.N. Veron Australian Institute of Marine Science -----------------------------------------------------------------------Member of:UEN: T08SS0098FPlease visit us here: http://www.facebook....uaristSocietySG Facebook Group: http://www.facebook....gid=34281892381 Link to comment Share on other sites More sharing options...
SRC Member desideria Posted January 6, 2011 SRC Member Share Posted January 6, 2011 very very neat and nice... Just be careful about the plugs and sockets that's above your sump.. wouldn't want those to fall in. Do keep up with the updates of this tank.. looks AWESOME! Very good idea about having a pipe leading out for Fuss free water change... you've given me ideas for my next tank setup too. Quote Cheers, Desi Sheldon (TBBT): A little misunderstanding? Galileo and the Pope had a little misunderstanding... Link to comment Share on other sites More sharing options...
SRC Member Ketchup Posted January 6, 2011 SRC Member Share Posted January 6, 2011 Nice looking tank! more pics pls! Quote Link to comment Share on other sites More sharing options...
SRC Member straydum Posted January 6, 2011 SRC Member Share Posted January 6, 2011 wow great planning! you really thought this one out and now there're awesome results to back it the large cabinet gives you so much space to put so many things! envyy Quote Link to comment Share on other sites More sharing options...
SRC Member poomoon Posted January 6, 2011 SRC Member Share Posted January 6, 2011 and that tank provides so much space for LS as well well planned and very neat tank ... umm, very nice house as well Quote 25 Gal Micro Ocean Link to comment Share on other sites More sharing options...
jackryan Posted January 6, 2011 Share Posted January 6, 2011 and that tank provides so much space for LS as well well planned and very neat tank ... umm, very nice house as well Very nice... hope you can share more pics! Quote Link to comment Share on other sites More sharing options...
SRC Member dominik Posted January 6, 2011 SRC Member Share Posted January 6, 2011 Nice tank and good workmanship (unlike mine ). BTW, did u get HDB permit for the tank? Quote Current tank Past tank Link to comment Share on other sites More sharing options...
SRC Member peacemaker Posted January 6, 2011 SRC Member Share Posted January 6, 2011 Very nice set up. Looking forward to updates. Quote Link to comment Share on other sites More sharing options...
jetski250 Posted January 6, 2011 Author Share Posted January 6, 2011 Hi Wilson, very sharp observation may I say. Yes dosing pump still part of the plan but have not installed as corals would go in probably in 2 mth. Here's a pic of the pump for you. Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
jetski250 Posted January 6, 2011 Author Share Posted January 6, 2011 Thanks guys for the encouragement. Wanted a tank as big as possible that can fit into my space for the fishes and all the eqt. Wife insisted on keeping it neat or NO TANK. Dom, hope the permit not needed for private. In any case tank is adjacent to housing shelter so think ok. Desideria, good point on the socket. Will be careful! Wilson, I stay near Ang Mo Kio so guess it's neither. if I just go to one shop this weekend for LS. Which one would you recommend? Here's a few more pics Rocks a bit more close-up Like the shape of this piece. Looks small here but it is about 40 cm wide External Overflow - like this design as less distraction and more room in main display. Tunze Controller for the 4x 6105. Comes with a led light that simulate moon cycle. Will try later Always like Tunze and these guys really create waves. LFS still owes me another 2. Added a side trap-door to view the tank from side when necessary. In case some fishes try to hide from me. Another shot Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
Eniram Posted January 6, 2011 Share Posted January 6, 2011 Why is your tunze upside down? Nice tank design and looks very familiar Quote Link to comment Share on other sites More sharing options...
SRC Member kueytoc Posted January 7, 2011 SRC Member Share Posted January 7, 2011 Veri nicezzz neat tanky & lovely furnishing ! Enjoy ya stocking up but do it slowly. Thanks guys for the encouragement. Wanted a tank as big as possible that can fit into my space for the fishes and all the eqt. Wife insisted on keeping it neat or NO TANK. Dom, hope the permit not needed for private. In any case tank is adjacent to housing shelter so think ok. Desideria, good point on the socket. Will be careful! Wilson, I stay near Ang Mo Kio so guess it's neither. if I just go to one shop this weekend for LS. Which one would you recommend? Here's a few more pics Rocks a bit more close-up Like the shape of this piece. Looks small here but it is about 40 cm wide External Overflow - like this design as less distraction and more room in main display. Tunze Controller for the 4x 6105. Comes with a led light that simulate moon cycle. Will try later Always like Tunze and these guys really create waves. LFS still owes me another 2. Added a side trap-door to view the tank from side when necessary. In case some fishes try to hide from me. Another shot Quote WRASSEY REEF PARADISE 4ftx2.5ftx2.5ft SRC Site: Welcome to My World of WRASSEYS !!! CHUISUI Site: WRASSEY World of REEF Paradise !!! mio CAN-REEF Site: Wrassey World !!! SiamReefClub Site: WRASSEY MASTER Hyper ไฮเปà¸à¸£à¹Œ ; Silly Fools ; Labanoon ; I-Nam ไà¸à¸™à¹‰à¸³ ; Modern Dog ; Sirasak Ittipolpanish ; Annita - Nisita Pongsong Twin-CAMs Power Module ! ; MIO Dream Car ! ; MIO Alter-EGO ! Link to comment Share on other sites More sharing options...
jetski250 Posted January 7, 2011 Author Share Posted January 7, 2011 HaHa. Did not even realize till u pointed it out. Now it makes better sense. Was wondering why the connecting wires are awkward. Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
jetski250 Posted January 16, 2011 Author Share Posted January 16, 2011 Caught 3 parasitic isopods overnight using a DIY "water bottle" fish trap. They are 1 plus cm long and shaped like a lice. Evil looking monsters! First noticed one on the tail of my orange striped goby and freaked out a bit. Will continue trapping for a while until sure totally rid of it! Added 4 Fire Shrimps bought from Ah Beng to the tank today. Should have bought six instead as they all went into hiding. Quote 300G Main Display - 7 x 3 x 3, 60G Sump 4 x Tunze 6105 + 7095 controller, 2 x Eden 5000 l/hr main return 1HP Reefcool Compressor 4 x Reeflux 250W 12K MH with dimmable ballast + ATI T5 blue actinic Super Reef Octopus 5000 skimmer, Skimz PO4 Reactor, 36W UV sterilizer Bubble Magus 7 Channel Dosing Pump Link to comment Share on other sites More sharing options...
JizzHut Posted January 16, 2011 Share Posted January 16, 2011 sounds quite scary.. btw do randiant wrasse to makan e pest Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.