Jump to content

Rescaping - 3 feet(L) x 1.5 feet(W) x 2 feet(tank)


Fitzgerald Dizon
 Share

Recommended Posts

Started my reef project 2 months ago.

And to be honest as a newbie to this hobby, I was not able to do my proper homework before starting a reef tank.

Resulting to losing valuable $$ and live stocks due to wrong/inconsistent water parameters, overstocking, etc.

Below is how my previous tank looks like:

BEFORE

post-23085-0-99802000-1385438758_thumb.j

Steps I performed while doing the rescaping:

1. Planning ( Initially I intended to go for FOWLR but now I really want a reef tank with SPS, LPS in it ).

a. Getting the substrate ( bought two packs of Caribsea )

b. Solution to de-chlorinate tap water ( For tap water, I am lucky that our current apartment have an RO unit which is my water source )

c. Solution to establish Biological Filtration( Microbacter 7 )

d. Getting Medias ( ROWA carbon with mini reactor, ROWA Phos with mini reactor, Media balls, Coral chips, Ceramic Bio-Rings )

e. Foam to filter water after putting sand.

f. Added test kits for Calcium, Magnesium and Alkalinity ( Initially I only have Ph, Ammonia, Nitrite, Nitrate and Phosphate )

g. Drawing a rock layout that will not hamper water circulation.

2. Remove all livestocks and put in a my QT container ( I am running my QT box with Deltec MCE 600 )

3. For the rocks to ensure minimal to zero pests, I did a freshwater dip for a whole day.

4. Initially planning to reuse my existing sand but eventually decided to remove it and start anew because there's alot of detritus build up(hard to reach areas) due to poor water circulation.

5. Cleaned the tanked to remove any algae build up and dried the tank for 4 hours.

6. Started putting the substrate and water

7. Filtered the water to clear from the floating substrate for almost a day.

8. Once the water was clear, I dissolved salt and put in my new sump.

9. Started putting my rocks in the Display tank and the rest I tried to fit in as much as I can in my sump.

10. Checked Salinity ( 1.025 ) and PH ( 8.3 )

11. Added the Microbacter 7 based on the directions.

12. Added also Ammonia nite out as I read that ammonia spike occurs for new tanks.

13. Now cycling for 5 days and will check my parameters tonight.

AFTER:

post-0-0-04838300-1385440068_thumb.jpg

I know patience is the key to successful reefing but I've been really wanting to start stocking up.

Trying hard to suppress this urged to start stocking.

I know the longer I cycle the better. Sigh...

Please ask, comment or give any ideas/advices that will help in this new hobby of mine.

I would greatly appreciate it.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

  • SRC Supporter

looking good bro,

care to share more on equipment in the sump with photos?

guess u need to cycle ur tank abit more because i believe the bac on the liverocks were all dead after u soak them in freshwater for a day.

but no worries let them slowly build up again

[ ]

[ ]

Reef Reefing Reefed

Link to comment
Share on other sites

I like your scape bro. Gives better water circulation and hence debris management. Good height too. So water changes won't affect any LS on them. Not congested and fairly spacious for growth. At most can add a Causeway linking Singapore and Malaysia?

Link to comment
Share on other sites

looking good bro,

care to share more on equipment in the sump with photos?

guess u need to cycle ur tank abit more because i believe the bac on the liverocks were all dead after u soak them in freshwater for a day.

but no worries let them slowly build up again

Thank you very much sir!

Below is the photo of my Sump set up.

post-23085-0-78590800-1385520900_thumb.j

I'm currently using the following:

Protein Skimmer: Reef Octopus NW-150-6530

Mini Reactors: 1 with ROWA Phos

1 with ROWA Carbon

Return Pump: Hydor L40

Refugium: Handful of Chaeto and put some live rocks

Refugium light using EVO 12" LED

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Very nice scaping in the after..water is gold..happy reefing..

Thank you very much.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Love the new scape with 2 distinct islands.

Thank you very much.

In this way, can put more corals and fishes have more room to swim..

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

MUCH Better !!!!!!!!!!!!!!!!!! Swee !!!!!!!!!!!

Thank you very much for the comment..

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Aaahh.... sweet. Planning is key! Now sit back, relax and plan on corals scaping. ^_^

When you mentioned coral scaping..

I was scratching my head, oh yeah where to place this and that.. hahaha..

But should be enough place..

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Nice Landscape ! Refreshingly better than yr previous !

Thank you.

I agree..

Last time when the fish hides or go at the back cannot find or see..

But arent my rocks to little?

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Nice new scaping.. enjoy!

Thanks for the comment sir Kelvin..

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

I like your scape bro. Gives better water circulation and hence debris management. Good height too. So water changes won't affect any LS on them. Not congested and fairly spacious for growth. At most can add a Causeway linking Singapore and Malaysia?

A bro advised to have proper water circulation that's why I came up with this scape.

Thank you very much for the comments.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Water Parameters as of 2013/11/26

Salinity: 1.024

Ammonia: 0.5 ppm

Nitrite: 0 ppm

Nitrate: 10 ppm

Ph: 8.8

Alkalinity: 13.4 dKH

Phospate: 0 ppm

Any comments, suggestions and advices would be greatly appreciated.

post-23085-0-48839700-1385522666.jpg

post-23085-0-31627300-1385522677_thumb.j

post-23085-0-19717800-1385522692_thumb.j

post-23085-0-00260400-1385522713_thumb.j

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Bro

Yr dKH seems to be on the high side ( generally keep it betw 7-9 wld be fine )

As for the amt of rocks , on retrospect, personally i reckoned u can in fact be able to stack up another level for both Twin Towers to facilitate future placement for those light loving corals such as Sps ( if u're going over to the Dark side ! )

Link to comment
Share on other sites

Bro

Yr dKH seems to be on the high side ( generally keep it betw 7-9 wld be fine )

As for the amt of rocks , on retrospect, personally i reckoned u can in fact be able to stack up another level for both Twin Towers to facilitate future placement for those light loving corals such as Sps ( if u're going over to the Dark side ! )

Yeah its very high..

Please advice how to lower it?

Will 5% - 10% water change on a daily basis help lower Alkalinity?

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Bro

Yr KH will come down surely and eventually as yr corals and stuff consume and grow albeit water change is another viable way out but most imptly it is the essence of being able to keep all our parameters stable that will determine our long term success. Hope that helps.

Link to comment
Share on other sites

Salinity: 1.024

Ammonia: 0.5 ppm

Nitrite: 0 ppm

Nitrate: 10 ppm

Ph: 8.8

Alkalinity: 13.4 dKH

Phospate: 0 ppm

Your Ammonia must be 0.

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Bro

Yr KH will come down surely and eventually as yr corals and stuff consume and grow albeit water change is another viable way out but most imptly it is the essence of being able to keep all our parameters stable that will determine our long term success. Hope that helps.

Thanks bro.

Will do water parameter religiously to ensure water quality.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Salinity: 1.024

Ammonia: 0.5 ppm

Nitrite: 0 ppm

Nitrate: 10 ppm

Ph: 8.8

Alkalinity: 13.4 dKH

Phospate: 0 ppm

Your Ammonia must be 0.

Noted on this sir.

Today is my 6th day cycling the tank.

Hopefully everything will get better soon.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

  • SRC Member

Salinity: 1.024

Ammonia: 0.5 ppm

Nitrite: 0 ppm

Nitrate: 10 ppm

Ph: 8.8

Alkalinity: 13.4 dKH

Phospate: 0 ppm

Your Ammonia must be 0.

bro, is the pH and Alkalinity unusually high?

Main Tank: 5 x 1 x 1

Return from overflow: Eheim compact+ 5000

Lighting: 2x 54W T5

Skimmer: Deltec SC 1350

Chiller: Arctica 1/10

Wave Maker: Tunze Nano Wavebox & Tunze 6055 with Photocell
Monitor 1: American Marine Pinpoint pH monitor
Monitor 2: American Marine Pinpoint Temperature monitor

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...