Jump to content

Diy Chiller


bwilly
 Share

Recommended Posts

anyone think of DIY chiller.

me n fren thought of doing one simple

setup when the lights come onz at nite

the water get heated quite fast.

1) simple icepack clam onto the water tube hose.

Need to check n monitor 2hrs or so. (twin icepack, rotating)

Wrap with insulation material to preserve the temperature

of icepack. The size of icepack to decide by size of tank.

Should be similar like a chiller effect.

2) Styrofoam box drill with holes near the bottom n sealed

with silicon. the water tube hose is insert into holes. using

a few icepack drape over the hose. size of box depends on

the Styrofoam box.

To prevent overchill, optimum size of icepack n Styrofoam

box is needed. (eg. different size for different tanks)

Fan can only drop temp to ard 28c, but with the icepack

maintain ard 27c should not be a problem. There should

not be drastic temperature. If from morning till late afternoon,

with fan, temperature should maintain 27c. late afternoon

with the lights (esp MH) come on, temperature easily hit 29-30c.

After photoperiod is over, and effect of the icepack method

bolek, can close shop n sleep. temperature still maintain

ard 27-28c in the night. Main concern is those with heavy

duty lights heating the tank upz.

I think the Styrofoam box method will at least last, 5hours

or so, with good insulation.

the other icepack clam method, maybe 2hours max.

Link to comment
Share on other sites

  • SRC Member
anyone think of DIY chiller.

me n fren thought of doing one simple

setup when the lights come onz at nite

the water get heated quite fast.

1) simple icepack clam onto the water tube hose.

Need to check n monitor 2hrs or so. (twin icepack, rotating)

Wrap with insulation material to preserve the temperature

of icepack. The size of icepack to decide by size of tank.

Should be similar like a chiller effect.

2) Styrofoam box drill with holes near the bottom n sealed

with silicon. the water tube hose is insert into holes. using

a few icepack drape over the hose. size of box depends on

the Styrofoam box.

To prevent overchill, optimum size of icepack n Styrofoam

box is needed. (eg. different size for different tanks)

Fan can only drop temp to ard 28c, but with the icepack

maintain ard 27c should not be a problem. There should

not be drastic temperature. If from morning till late afternoon,

with fan, temperature should maintain 27c. late afternoon

with the lights (esp MH) come on, temperature easily hit 29-30c.

After photoperiod is over, and effect of the icepack method

bolek, can close shop n sleep. temperature still maintain

ard 27-28c in the night. Main concern is those with heavy

duty lights heating the tank upz.

I think the Styrofoam box method will at least last, 5hours

or so, with good insulation.

the other icepack clam method, maybe 2hours max.

tried that...doesn't work too well..even for a 2 feet tank...unless you have a very big box

Tank: 5 X 2 X 2.5

Sump : 3 X 1.5 X 1.8

Tunze 6060

Tunze TF08

Oceanrunner 6500

Deltec AP 902 Protein Skimmer

I-Aquatic Calcium Reactor

Arctica Chiller

Link to comment
Share on other sites

  • SRC Member

guys..i've succeeded in my DIY Chiller attempt!! @#$@:D

I used a split unit compressor 1 HP, and a titanium heat exchanger (rated 1.5 - 1 HP), temp controller, TEV and Dryer/filter + the help of many frens here who really helped me a lot in the project (you know who you are!!!) B)

after days of experimenting and fidgeting, i still couldn't get the compressor system to work well with the TEV!! the system would just shutdown and not move after 1 hr of cooling!! BUT finally i've grasped the refrigeration tricks!! thanks again to the usual suspects in HVAC for their invaluable information about charging, overload protection, subcooling, super heating, pressure-temperature vs freon property..blah blah blah!! it's not tt difficult after all!!

enough of my nonsense, now for the chiller performances:

Specs:

National Split Unit Aircon Compressor, 1 HP.

Wattage: 880/960w (220/240v)

Freon: R22

Cooling Subject: 1400L of water in a 7ft tank and a 5 ft sump

Other indirect loads: not yet, haven't install any burners!! running 3 pumps, 2 external and 1 internal

flow rate of water: 4000l, hailea pump

ambient temp: 29-31 (cooler today)

temp controller: some weird temp controller that can also switch lights and dihumidifier??

target temp: 25deg

starting temp: ~28-29 deg

hystersis: 1 deg, 15 mins anti-restart time to protect compressor

rate of cooling: approx 1 hr per degree in the day time, faster at nite!

total time:count it yourself! :lol:

very very pleased!!!

no photo yet but i'll get them as soon as i finish the rack to hold the compressor and heat exchanger!

Link to comment
Share on other sites

Well done Alvy, that must have been one hell of an engineering project! How much $$$ did you spend? Perhaps you can create a new thread and share with us your experiences! :D

So do you have time for me now? I got some projects for you! LOL!

Link to comment
Share on other sites

  • SRC Member

NormanH,

Get the hint! We want split system type chiller so we can cool our room and tank at the same time.

post-36-1093875548.jpg

Warning: Heavy handed moderator in operation. Threads and post are liable to be deleted or moved without prior notification.

Moderator's prerogative will be enforced.

Any grievances or complains should be addressed to The Administrator.

http://www.sgreefclub.com/forum/uploads/post-36-1073276974.gif post-36-1073276974.gif

Link to comment
Share on other sites

  • SRC Member

$$$ how much?? :P

if i'm to get a brand new 1 HP compressor system (not aircon rotary type but normal compressor type with condensor, TEV, filter/drier/receiver, 1 HP ti coil heat exchanger, someone to wield things together and charge freon.everything will fall just below 1k..very very possible!!

i'm very glad to say my compressor system was given to me by a fren and it was in top notch working condition.really appreciate the kind "GIFT"! so my total expenditure is much less than 1 k!!

i will share necessary info for those who are keen in the diy!!

Link to comment
Share on other sites

  • SRC Member

powerconsumption??

i tot i wrote in the specs:

i used an ammeter to record the running current for an hr (test for problems just now)...4 amp constant throughout..

power=current X voltage

P=4 X 220, or 4 X 240

so it is either 880w or 960w depending on the voltage. correct me if i'm wrong!

Link to comment
Share on other sites

Hi Alvy,

well done!! Now I'm thinking of giving up my Hailea and DIY one with maintainable cooling coils to always have a high efficiency (and pay lower electricity bill). Maybe I can also site my compressor and condenser into another area as well. Hmmmm....

Link to comment
Share on other sites

$$$ how much?? :P

if i'm to get a brand new 1 HP compressor system (not aircon rotary type but normal compressor type with condensor, TEV, filter/drier/receiver, 1 HP ti coil heat exchanger, someone to wield things together and charge freon.everything will fall just below 1k..very very possible!!

i'm very glad to say my compressor system was given to me by a fren and it was in top notch working condition.really appreciate the kind "GIFT"! so my total expenditure is much less than 1 k!!

i will share necessary info for those who are keen in the diy!!

hey bro.. im keen in the chiller DIY but need to know a lot of stuff

1, wat is HP??

2, wats freon R22?

how do you go around doing the wiring???

hope to hear from you soon...

Link to comment
Share on other sites

  • SRC Member

sorry i was talking to robe!!hehe.

yes the project can cost ard 900-1100 depending on the horsepower (HP)..and the compressor type you are getting! this include the digital temp controller, wielding of the entire set + freon (refrigerant) charging!

but there is one major drawback!! your set will not have any warranty or after sales service..anything go wrong, dun look for me!!ha! i'm not at all responsible :angel:

well i would recommend to get chillers from establish chiller manufacturer or brand as they do have aftersales!! the chiller is a very CHALLENGING and at times frustrating diy project to undertake!!

Link to comment
Share on other sites

Hi Alvy,

So how is it so far, did it ran all the way to 25 C? Your wattage is similar to the Hailea but your coil seems to be more efficient. 4A is slightly higher than the Hailea which runs on 3.8A but the extra current may come from the condenser fan as split unit fans are bigger.

Robe

Link to comment
Share on other sites

  • SRC Member

hey man..all the way to 25 deg!! exactly 1 deg per hr for my large tank!!my livestock never felt so cool ever since i shifted tank!

i set the hyst temp to 2deg with 15 min of delay in compressor startup to prevent accidental restart of the system due to power outage!

oh yes the fan is HUGE!!!and the fins are sweeettt.... :paiseh:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...