Jump to content

Selling my car lai leh support abit, super fun car to drive


Recommended Posts

  • SRC Member

come come cheap cheap sale for all the below , best maintained MR2 in SG

but only problem is need cash payment as no dealers want to do inhouse loan unless they can earn more then 10k - i already checked

selling because i got poisoned by another car but i need to clear this car 1st before i can commit to the other car

http://www.sgcarmart.com/used_cars/info.ph...739&DL=1000

Mods list below, 99% of the parts are all bought and imported in by me so i have full knowledge on the car , you cant find another car in the market that have full after sales support like this one :eyebrow: :eyebrow:

Bidded Number Plate (SGX6100X) COE March 2011

just went for serving last week and changed new manifold gasket and turbo gasket and oil washer

Engine done in jan 2008 @ 30000 mileage ( all parts bought new, I don’t use remanufacture unless impossible to find new )

now mileage at 86000

engine able to redline at 8000rpm but I set it to 7000rpm rev-cut for safety

engine oil using AMS severe racing 20w50, change every 4000km

HKS F-Con V-pro tuned by Furugawa from ST Power at 366bhp on engine (306 on wheels) using 3 inch straight through muffler

Modded Exhaust with Muffler ( on car now ) with LTA approved chop and signature

TRD plug leads

Denso Iridium ir24

Stock Cams

Ferrea 6000 series stainless steel valves intake (standard size)

Ferrea 6000 series stainless steel valves exhaust (standard size)

Ferrea Racing Hi Temp Valve Stem Seal

Ferrea Racing Steel Valve Locks

Engle Reinforced Valve Spring

Ross Zero Silicon Forge Racing Pistons

Eagle Type H Con Rods

Cometic Multi-Layer Metal Headgasket 1mm

ACL Race Bearings

Full ARP headstuds and bolts

Power Enterprise Super Strong Timing Belt

Stock Water Pump

TRD 72c racing thermostat

Sard Fuel Regulator

Wolfkatz Racing Fuel Rail

Steel Braided Fuel Lines

19 row oil cooler with Steel Braided oil lines

Perma Cool Oil filter relocator

Cusco Oil Catch Tank

all water hoses changed to new stock hoses

denso 100a Alternator with spare

Denso First Time Fit Oxygen Sensor

Remanufacture Igniter (rare )

Walbro 255lph fuel pump

Force Induction

Force Performance STI Green Turbo rated for 450hp (may 2008 )

Manifold modified to fit subaru turbo for easy maintenance

ARC side mount intercooler ( rare )

Full silicon couplins and hoses

Blitz SBC ID3 Boost Controller

Blitz DD BOV

Hurricane stainless steel open pod filter ( 2 months old )

New manifold Gasket just done at Man Exhaust last week and to replace turbo oil washer

DriveChain done in June 2008

Gear oil change every 10000km using Royal Purple MaxGear LSD gearoil

OS Giken Twin Plate Clutch with flywheel

ARP Flywheel Bolts

3rd Gen E153 LSD GearBox (extremely rare ) with spare gen 2 gearbox

3rd Gen DriveShaft / with spare gen 2 drive shaft

Cusco Type RS 2 Way LSD

TRD short shifter

Brass shift bushing

Teflon Lined Braided Steel Clutch Line

Suspension and brakes

Goodridge Steel Braided Brake Lines

Cusco Brake Stopper

Gen 3 Turbo Front Calipers with Slotted Rotors

Gen 3 Turbo Rear Calipers with slotted rotors

Potterfield R4S brake Pads front and rear (dec 2008)

Tein Monoflex with faulty EDFC (May 2008 )

Full PU Bushings

PU engine mounting

Fully rebuilt Steering rack (non power steering )

Reinforce front endlinks modified to fit

Suspension techniques front and rear anti roll bar with reinforment plate

Body Exterior

Replica Borders Front Bumper

Replica Veilside Side Skirt

Replica Veilside Spoiler

Original Garnardor Mirror

Original Left Toms Airscoop

Replica Right Toms Airscoop

Vented Engine Cover

17 inch Replica Full Chrome Works Emotion Rims

new house of kolors Gittering Gold Flakes paint

others

Eccentric T-Top Guide

Ultra Racing fender brace

Ultra racing 4 point lower brace

Toms Racing front strut bar

Rear Cusco Rear Strut Bar

Rear X-Engine Bar

custom aluminium rear ball joint protector

frameless twister windscreen wiper

Recon air con compressor change to new type of gas ( done 6 months ago )

extras / spares

Fujitsubo Muffler

3 inch straight through single exit for track

3S-GTE lower engine block

spare engine cover

Spare engine side covers

spare rear spoiler

a pair of 15inch drift rims with new federal tyres unused

Spare Targa Roof left and right

Cabin/Cockpit

TRD 300km speedometer original

5x Defi guages with sunshade and control unit 2

boost, oil temp , oil press , water temp , fuel press with indicator

Eclipse cd7100 headunit with usb

Rainbow front speakers

Sabelt Titan Full bucket seat (FIA approve )

Sabelt 4 point harness ( Non - FIA)

Pivot shift light

Apexi turbo timer

New Windscreen ( 1 year old ) change due to lots of chips on old windscreen

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member

Wow...solid specs... :D

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
Wow...solid specs... :D

kin mai tu liao call me lah lol

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member

woa solid specs and nice colour

Pain is temporary. It may last a minute, or an hour, or a day, or a year, but eventually it will subside and something else will take its place. If I quit, however, it lasts forever.


Member of:
www.marineaquarist.sg

Link to comment
Share on other sites

  • SRC Member
woa solid specs and nice colour

Ok, u can buy it liao... :eyebrow::whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
this car from Pasir Ris LFS to CF 10mins more then enough.. hahaha

no lah to be exact is 14mins oophs

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member
ups for this. dam good for chionging shipment. seen it, was amazed by it.

haha thats y i always fast hand fast legs mah

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member
woa solid specs and nice colour

lai lai price is neg u can change your nick to bugattilambomr2

some more it is mid-engine rear wheel drive, same as ferrari bugattis and lambos leh , ok lah onz you gonna be the next owner chiong lfs with it right

tell me yes

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member
lai lai price is neg u can change your nick to bugattilambomr2

some more it is mid-engine rear wheel drive, same as ferrari bugattis and lambos leh , ok lah onz you gonna be the next owner chiong lfs with it right

tell me yes

U upgrading to Aston Martin, Lotus or Ferrari or Lambo??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

maybe dark knight vehicle huh.....matches dackie....lol

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member
maybe dark knight vehicle huh.....matches dackie....lol

BAT MOBILE... :eyebrow::whistle

Confirmed first to reach any shipment... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
maybe GTR.. dun think Mr Law is more interested in those eur car..

its 35 by nissan but not r35 lol, i scared of the r35 gearbox issue and i spent all my money on my tank and car , no money for downpayment

so some1 help me by buying car lol

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member
:shock::bow:

If only I had the monies...

u mai kaekae lah , i'm sure you got, come and take your ric and view the car , bring along a cheque for deposit as well hor

see you sunday :eyebrow:

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member
U upgrading to Aston Martin, Lotus or Ferrari or Lambo??? :eyebrow:

i dun want to play mid engine already , going to FR setup

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member
lai lai price is neg u can change your nick to bugattilambomr2

some more it is mid-engine rear wheel drive, same as ferrari bugattis and lambos leh , ok lah onz you gonna be the next owner chiong lfs with it right

tell me yes

hehehe no money and no licence <_<

Pain is temporary. It may last a minute, or an hour, or a day, or a year, but eventually it will subside and something else will take its place. If I quit, however, it lasts forever.


Member of:
www.marineaquarist.sg

Link to comment
Share on other sites

  • SRC Member
u mai kaekae lah , i'm sure you got, come and take your ric and view the car , bring along a cheque for deposit as well hor

see you sunday :eyebrow:

Honest! I'm a poor reefer... that's why I'm still into nanos :whistle

Pls kindly give me another week to collect the ric, bro! I'm beginning to think its the LEDs that are too strong. Just shifted the remaining ones under the shade yesterday, and will be adding the light diffusers back to see if it helps. <_<

Link to comment
Share on other sites

  • SRC Member
Honest! I'm a poor reefer... that's why I'm still into nanos :whistle

Pls kindly give me another week to collect the ric, bro! I'm beginning to think its the LEDs that are too strong. Just shifted the remaining ones under the shade yesterday, and will be adding the light diffusers back to see if it helps. <_<

take your time dont worry

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member

last price at 20k cash and carry by saturday before i throw to dealer, come on 20k for a toy car renew coe at 23k now and you get to have 4.3k dep per year where to find,

my paintjob alone is 1/4 of the car price , fast fast come

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

 Share



×
×
  • Create New...