Jump to content

3stage crystal pro di unit


Aldrick
 Share

Recommended Posts

Hi all,I bought a new 3stage crystal pro di unit.However i cant seems to get low reading.first time is about 64,2nd time is about 30plus.I am already dripping at very very slow rate.A cup of water to test it took about 1hour plus to drip.Anybody can advise?

Link to comment
Share on other sites

  • SRC Member

never insert di cartridge properly ?

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Input izzit to the carbon first?

sediment filter -> carbon block -> DI

Teh'sTankSetup Decomm on 18/8/2012

Tank: 2x1x1 Rimless Tank (Sumpless)

Lighting: Aquazonic 2x24watts T5 (Actinic x Sun White)

Moonlight: Acardia 1W Led Light (Blue)

Filter: ISTA Max Care Cannister

Skimmer: Bubble Magus E3

Chiller: Resun CL450 (Aquazonic Evo Pump)

Wave: Boyu WM-25

Commissioned 20/9/2012

Tank: 3x2x2.5

Lighting: 250w DeLighting MH/ 2x 39w Delighting Diy T5 ATI Blue Plus

Skimmer: H&S Skimmer Type 110-F2000

Chiller: CL450 (Aquazonic Evo Pump)

Return Pump: Eheim 1260

Reactor: D&D H2Ocean FMR 75 (ADA 1500 Pump)(Rowaphos)

Wavemaker: 2x SunSun Wavemaker (3000L)

Incoming:

Conch ll Basic

ATO System/Tunze Osmolator

Magic Marine 3CH Dosing Pump

Link to comment
Share on other sites

  • SRC Member

sediment filter -> carbon block -> DI

Should be 1 carbon -> 2 di resin cartridge.

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

my tap water also 60+ TDS.. i run mine through a 1 carbon + 2 resin in a crystal pro unit.. resin carbon bought from madpetz since the original was used up.. it took me probably only 1 hour or so to make 30L of water..and yes my TDS is 0. Im guessing you insert your cartridge wrongly.. or try to run it faster see what happens.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

Bros,i put it at slow flow i get 30plus reading.I blast full tap max i get best result 8.Any idea whats wrong?i thought suppose to be slow flow better?blast full i get better result but i still can't get below 8

Link to comment
Share on other sites

Have you tried taking out the cartridge and giving it a good shake before installing it back? Drain and throw away water inside the cartridge holder.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Have you tried taking out the cartridge and giving it a good shake before installing it back? Drain and throw away water inside the cartridge holder.
Yes bro each testing i will drain out all water n on tap again.
Link to comment
Share on other sites

Yes bro each testing i will drain out all water n on tap again.
Including shaking the di resin in the cartridge? Do u dry them first or immediately on tap after fixing in cartridge?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Yup I gt shake.i nv dry them if I do continuous testing . But each time test end I will drain off all cartridge water
The resin in cartridge might be expired. Maybe try to get a free replacement from where u got it and indicate the problem that u can't achieve 0 TDS. I used to have a cartridge that can only achieve 30plus at best.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

For a working DI filter, no need to be very slow flow. I can normally get 1 pail in an hour n maybe more but i dont do that so that the water will have long contact time with carbon.

Ensure ur container is clean n not the one you use for mixing saltwater.

Link to comment
Share on other sites

Ensure your container is clean and drain away the first 1 litre if you never use your RO/DI unit for more then a week

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...