Jump to content

Decomm Sale


Recommended Posts

  • SRC Member

PRICES REVISED AND REDUCED!!!! Reefers interested in any particular item may sms me at 94797300. =)

Tank: 4x2x2 12mm with external overflow box.

Propagation Tank: 2ft x 2ft x 16 inch ht 12mm with internal overflow.

Cabinet: 6 ft cabinet with solid wood structural support. The doors all come with ABS trimming. A added cost feature that i requested from my tank maker as it gives the door a nicer finishing. The cabinet holds the prop tank and main tank together. Comes with full GF piping.

Looking at $800 for the whole tank set as described above. Spent 2.8k on this tank set.

1. 6.7L Catalina Cylinder - $150 (Reserved)

2. Tunze Regulator (for connecting to CO2 Cylinder) - $85 (Reserved)

3. Hydor K3 - $70

4. Daikin 1HP Compressor with Titanium Coil (Comes with external thermostat controller) - $500 (very good price)

Am looking to clear these items ASAP so contact me for a quick deal!!

Thanks for the support!!!!!

Link to comment
Share on other sites

  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

  • SRC Member

PRICES REVISED AND REDUCED!!!! Reefers interested in any particular item may sms me at 94797300. =)

Tank: 4x2x2 12mm with external overflow box.

Propagation Tank: 2ft x 2ft x 16 inch ht 12mm with internal overflow.

Cabinet: 6 ft cabinet with solid wood structural support. The doors all come with ABS trimming. A added cost feature that i requested from my tank maker as it gives the door a nicer finishing. The cabinet holds the prop tank and main tank together. Comes with full GF piping.

Looking at $800 for the whole tank set as described above. Spent 2.8k on this tank set.

1. Hydor K3 - $70

2. Daikin 1HP Compressor with Titanium Coil (Comes with external thermostat controller) - $500 (very good price)

Am looking to clear these items ASAP so contact me for a quick deal!!

Thanks for the support!!!!!

Link to comment
Share on other sites

  • SRC Member

PRICES REVISED AND REDUCED EVEN FURTHER NOW!!!! Reefers interested in any particular item may sms me at 94797300. =)

Tank: 4x2x2 12mm with external overflow box.

Propagation Tank: 2ft x 2ft x 16 inch ht 12mm with internal overflow.

Cabinet: 6 ft cabinet with solid wood structural support. The doors all come with ABS trimming. A added cost feature that i requested from my tank maker as it gives the door a nicer finishing. The cabinet holds the prop tank and main tank together. Comes with full GF piping.

Looking at $600 for the whole tank set as described above. Spent 2.8k on this tank set.

1. Hydor K3 - $70

2. Daikin 1HP Compressor with Titanium Coil (Comes with external thermostat controller) - $500 (very good price)

Am looking to clear these items ASAP so contact me for a quick deal!!

Thanks for the support!!!!!

Link to comment
Share on other sites

  • SRC Member

PRICES REVISED AND REDUCED EVEN FURTHER NOW!!!! Reefers interested in any particular item may sms me at 94797300. =)

Tank: 4x2x2 12mm with external overflow box.

Propagation Tank: 2ft x 2ft x 16 inch ht 12mm with internal overflow.

Cabinet: 6 ft cabinet with solid wood structural support. The doors all come with ABS trimming. A added cost feature that i requested from my tank maker as it gives the door a nicer finishing. The cabinet holds the prop tank and main tank together. Comes with full GF piping.

Looking at $600 for the whole tank set as described above. Spent 2.8k on this tank set.

1. Hydor K3 - $70

2. Daikin 1HP Compressor with Titanium Coil (Comes with external thermostat controller) - $350

Am looking to clear these items ASAP so contact me for a quick deal!!

Thanks for the support!!!!!

Link to comment
Share on other sites

Bro, SMS him as he provided his number. Condition is good. Upz for his sales.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

No problem. All the best. Good deal.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

bro, the clam still around?

nope. i think he mentioned earlier that its dead already.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

haha did i mention that it was dead? Geez....

Sorry bro no more livestock for sale. The tank is empty now. All corals and fishes avail for sale are sold long ago... Thanks for the interest anyway!

paiseh paiseh... somehow opened multiple thread in multiple windows and mistaken this for kiko's thread.

apologies....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

tried to contact you many times but inbox full and handphone switched off.

is the compressor still available? i can collect by this week. please contact me asap 96232880

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member
tried to contact you many times but inbox full and handphone switched off.

is the compressor still available? i can collect by this week. please contact me asap 96232880

He's overseas and back tomorrow I think.

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

  • SRC Member

Hey there Nuclear!

Sent you an sms regarding your tank set up!, tried PMing you but your inbox is full. Hope to hear from you soon.

Thanks mate. ;)

" The brick walls are there for a reason. The brick walls are not there to keep us out; the brick walls are there to give us a chance to show how badly we want something. The brick walls are there to stop the people who don't want it badly enough. They are there to stop the other people! "

Randy Pausch, (The Last Lecture)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...